User's Manual

3.1 Desktop Installation

To install the GSD-804P on desktop, simply follow the following steps:

Step 1: Attach the rubber feet to the recessed areas on the bottom of the GSD-

804P, as shown in Figure 3-1.

GSD -804P

8-Port 10/100/1000Mbps with 4-Port 802.3at PoE+

Ethernet Switch

2 6

4 8

PoE

1 5

3 7

PoE

MAX

PWR

Extended

Standard

ACT1000

ACT10/100

LNK

PoE In-Use

1 2 3 4

Figure 3-1: Attaching the Rubber Feet to the GSD-804P

Step 2: Place the GSD-804P on desktop near an AC power source.

Step 3: Keep enough ventilation space between the GSD-804P and the

surrounding objects.

Note

When choosing a location, please keep in mind the environmental

restrictions discussed in Chapter 1, Section 4, under Specifications..

Step 4: Connect your GSD-804P to 802.3af/802.3at complied power devices (PD)

and other network devices.

A. Connect one end of a standard network cable to the 10/100/1000BASE-T

RJ45 ports on the front panel of the GSD-804P.

B. Connect the other end of the cable to the network devices such as

printer servers, workstations, routers, etc.

Note

Connection to the Switch requires UTP Category 5, 5e or 6 network

cabling with RJ45 tips. For more information, please see the

Cabling Specification in Appendix A.

Step 5: Supply power to the GSD-804P.

A. Connect one end of the power cable to the GSD-804P.

B. Connect the power plug of the power cable to a standard wall outlet.

When the GSD-804P receives power, the Power LED should remain solid Green.