User's Manual
- 9 -
- 10 -
- 11 -
- 12 - - 13 - - 14 -
Step 5: ConnectyourPoESwitchtoPoEPDdevices.
A.Connectone end of a standard network cable to port1 to
port 4 10/100/1000Mbps RJ45 ports on the front of the
PoESwitch.
B.Connect the other end of the cable to the 802.3at/af
powereddevices.
4 PoE IP Cameras
Power
PoE PoE PoE PoE
Perfect Combination of 4-Port PoE Switch + 4-ch NVR
4-channel NVR
Gigabit Ethernet Uplink
GSD-604HP
1000BASE-T UTP
PoE
1000BASE-T UTP with PoE
Power Line
Note
Cable Distance for Switch
The cable distance between the GSD-604HP and
PC/PD devices should not exceed 100 meters for
UTP/STPcable.
8.ProductSpecications
Model
GSD-604HP
4-Port10/100/1000T802.3atPoE+2-Port
10/100/1000TDesktopSwitch
HardwareSpecications
Network
Connector
610/100/1000BASE-TRJ45autoMDI/MDIX
ports
PoEInject
Port
4portswith802.3at/afPoEinjectorfunction
(Ports1to4)
LEDDisplay
System:Power(Orange)
Per PoE port:PoE(Orange,port1toport4)
Ethernet port:LNK(Green)
ThermalFan Fanless design
Switch
Architecture
Store and Forward
MAC Address
Table
4KMACaddresstablewithautolearning
function
Switch Fabric 12Gbps
Switch
Throughput
8.92Mpps @64 bytes
Jumbo Packet 9Kbytes
Flow Control
Backpressureforhalfduplex.
IEEE802.3xpauseframeforfullduplex
Power
Requirements
54DC,1.3A
ESDProtection 6KVDC
Note
Make sure the wiring is correct
Category 3/4/5 cable can be used for 10/100Mbps
operation. To reliably operate your network at
1000Mbps, you must use an unshielded twisted-
pair (UTP) Category 5/5e cable, or better data
grade cabling. While a Category 3 or 4 cable may
initially seem to work, it will soon cause data loss.
Step 6: SupplypowertothePoESwitch.
A. Connect one end of the power cable to the Switch.
B. Connect the power plug of the power cable to a standard
wall outlet.
When the PoE Switch receives power, the power LED should
remain solid orange.
Power
Consumption
Max.66.69watts,227.5BTU
Dimensions
(W x D x H)
168x93x32mm
Weight 374g
PoweroverEthernet
PoEStandard
IEEE802.3afPoweroverEthernet/PSE
IEEE802.3atPoweroverEthernetPlus/PSE
PoEPower
SupplyType
End-span
Power Pin
Assignment
1/2(+),3/6(-)
PoEPower
Output
PerPort54VDC,300mA.max.15.4watts
(IEEE802.3af)
Per Port 54V DC, 600mA. max. 30 watts
(IEEE802.3at)
PoEPower
Budget
65 watts
Standard Conformance
EMISafety FCCPart15ClassA,CE
Standard
Compliance
IEEE802.310BASE-T
IEEE802.3u100BASE-TX
IEEE802.3abGigabit1000BASE-T
IEEE802.3xFlowControlandBackPressure
IEEE802.3afPoweroverEthernet
IEEE802.3atPoweroverEthernetPlus
Environment
Operating
Environment
0 ~ 50 degrees C
Storage
Environment
-10~70degreesC
Operating
Humidity
5~95%,relativehumidity,non-condensing
Storage
Humidity
5~95%,relativehumidity,non-condensing
9. Customer Support
Thank you for purchasing PLANET products. You can browse
our online FAQ resource on PLANET Website rst to check if it
could solve your issue. If you need more support information,
pleasecontactPLANETswitchsupportteam.
PLANETonlineFAQs:
http://www.planet.com.tw/en/support/faq.php?type=1
Switch support team mail address:
support_switch@planet.com.tw
Copyright © PLANET Technology Corp. 2019.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners