User Manual

- 9 -
- 10 - - 12 -
- 11 -
- 13 -
Installing SFP Module
The section describes how to insert an SFP transceiver
into an SFP slot.
The SFP transceivers are hot-pluggable and
hot-swappable. You can plug in and out the transceiver
to and from the SFP port without having to power down
the Switch as Figure 1 shows.
SFP Transceiver
Figure 5-1: Plug in the SFP transceiver
Before connecting the other switches, workstation or
media converter,
1. Make sure both sides of the SFP transceivers are
the same media type, for example, 1000BASE-SX to
1000BASE-SX, 1000BASE-LX to 1000BASE-LX.
7. Product Specications
Product GSD-603F
HardwareSpecications
Ports
5 10/100/1000BASE-T
RJ45 auto-MDI/MDI-X ports
SFP/mini-GBIC Slot 1 1000BASE-X slot
Dimensions (W x D x H) 162 x 102 x 28 mm
Weight 398g
Power Requirements DC 5V, 1A external power
Power
Consumption
System on
Max. 0.6 watts/2.04 BTU
@ DC 5V
Ethernet
Full
Loading
Max. 4.1 watts/13.99 BTU
@ DC 5V
Enclosure Metal
SwitchSpecications
Switch Processing
Scheme
Store-and-Forward
Address Table 2K entries
Shared Data Buffer 1.5Mbits
2.Check theber-opticcable typethatmatches the SFP
transceiver model.
 To connect to MGB-SX SFP transceiver, use the
multi-mode ber cable with one side being the
male duplex LC connector type.
 To connect to MGB-LX SFP transceiver, use the
single-mode ber cable with one side being the
male duplex LC connector type.
Connecting Fiber Cable
1. Attach the duplex LC connector on the network cable
into the SFP transceiver.
2. Connect the other end of the cable to a device
– switches with SFP installed, ber NIC on a
workstation or a media converter.
3. Check the LNK/ACT LED of the SFP slot of the Switch.
Ensure that the SFP transceiver is operating correctly.
4. Check the Link mode of the SFP port if the link failed.
Flow Control
Back pressure for half
duplex
IEEE 802.3x pause frame
for full duplex
Switch Fabric 12Gbps
Throughput
(packet per second)
8.9Mpps
Jumbo Packet Size 9K
Standards Conformance
Standards Compliance
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit
Ethernet
IEEE 802.3z Gigabit Fiber
Ethernet
IEEE 802.3x Full-duplex
owcontrol
IEEE 802.3az Energy
EfcientEthernet(EEE)
Environment
Temperature
Operating: 0~50 degrees C
Storage: -40~70 degrees C
Humidity
Operating: 10~90%
(non-condensing)
Storage: 5~90%
(non-condensing)
PLANET TECHNOLOGY CORPORATION
e-mail: [e-mail] http://www.planet.com.tw
10F., No.96, Minquan Rd., Xindian Dist., New Taipei City, Taiwan, R.O.C. Tel:[phone] Fax:[phone]
EC Declaration of Conformity
For the following equipment:
*Type of Product: 5-Port 10/100/1000T +1-Port 1000X SFP Gigabit Ethernet Switch
*Model Number: GSD-603F
* Produced by:
Manufacturer‘s Name : Planet Technology Corp.
Manufacturer‘s Address: 10F., No.96, Minquan Rd., Xindian Dist.,
New Taipei City 231, Taiwan, R.O.C.
is herewith confirmed to comply with the requirements set out in the Council Directive on the
Approximation of the Laws of the Member States relating to Electromagnetic Compatibility
Directive on (2014/30/EU).
For the evaluation regarding the EMC, the following standards were applied:
EN 55032 (2012/AC:2013)
EN 61000-3-2 (2014)
EN 61000-3-3 (2013)
EN 55024 (2010+A1:2015)
Responsible for marking this declaration if the:
 Manufacturer  Authorized representative established within the EU
Authorized representative established within the EU (if applicable):
Company Name: Planet Technology Corp.
Company Address: 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan,
R.O.C.
Person responsible for making this declaration
Name, Surname Kent Kang
Position / Title : Director
Taiwan June 12, 2017
Place Date Legal Signature
8. Customer Support
Thank you for purchasing PLANET products. You can
browse our online FAQ resource on PLANET Website
rst to check if it could solve your issue. If you need
more support information, please contact PLANET switch
support team.
PLANET online FAQ :
http://www.planet.com.tw/en/support/faq.php?type=1
Switch support team mail address :
[e-mail]
Copyright © PLANET Technology Corp. 2017.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All
other trademarks belong to their respective owners.