User's Manual

- 9 -
- 10 -
- 11 -
- 12 - - 13 - - 14 -
Installing SFP Module
The section describes how to insert an SFP transceiver into
an SFP slot.
The SFP transceivers are hot-pluggable and hot-swappable.
You can plug in and out the transceiver to and from the
SFP port without having to power down the Switch as
Figure 5-1 shows.
MFB/MGB-Series SFP Transceiver
Figure 5-1: Plug in the SFP transceiver
Before connecting the other switches, workstation or media
converter,
1. Make sure both sides of the SFP transceivers are the
same media type, for example, 100BASE-FX to 100BASE-
FX, 1000BASE-SX to 1000BASE-SX, 1000BASE-LX to
1000BASE-LX.
6.ProductSpecications
Product GSD-603F
HardwareSpecications
Ports
5 10/100/1000BASE-T RJ45 auto-
MDI/MDI-X ports
SFP/mini-GBIC Slot 1 100/1000BASE-X slot
Dimensions
(W x D x H)
162 x 102 x 28 mm
Weight 398g
Power Requirements DC 5V, 1A external power
Power
Consumption
System
on
Max. 0.6 watts/
2.04 BTU @ DC 5V
Ethernet
Full
Loading
Max. 4.1 watts/
13.99 BTU @ DC 5V
Enclosure Metal
SwitchSpecications
Switch Processing
Scheme
Store-and-Forward
Address Table 2K entries
SharedDataBuer 1.5Mbits
2.Check the ber-optic cable type that matches the SFP
transceiver model.
¾To connect to MFB-FX/MGB-SX SFP transceiver, use the
multi-mode ber cable with one side being the male
duplex LC connector type.
¾To connect to MFB-F20/MGB-LX SFP transceiver, use
the single-mode ber cable with one side being the
male duplex LC connector type.
Connecting Fiber Cable
1. Attach the duplex LC connector on the network cable to
the SFP transceiver.
2. Connect the other end of the cable to a device –
switcheswithSFPinstalled, ber NIC on a workstationor
a media converter.
3. Check the LNK/ACT LED of the SFP slot of the Switch.
Ensure that the SFP transceiver is operating correctly.
4. Check the Link mode of the SFP port if the link failed.
Flow Control
Back pressure half duplex, IEEE
802.3x pause frame full duplex
Switch Fabric 12Gbps
Throughput
(packet per second)
8.9Mpps
Jumbo Packet Size 9K
Standards Conformance
Standards Compliance
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3u Fast Ethernet Fiber
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3z Gigabit Fiber
Ethernet
IEEE802.3xFull-duplexow
control
IEEE802.3azEnergyEcient
Ethernet (EEE)
Environment
Temperature
Operating: 0~50 degrees C
Storage: -40~70 degrees C
Humidity
Operating: 10~90%
(non-condensing)
Storage: 5~90%
(non-condensing)
PLANET TECHNOLOGY CORPORATION
e-mail: sales@planet.com.tw http://www.planet.com.tw
10F., No.96, Minquan Rd., Xindian Dist., New Taipei City, Taiwan, R.O.C. Tel:886-2-2219-9518 Fax:886-2-2219-9528
EC Declaration of Conformity
For the following equipment:
*Type of Product : 5-Port 10/100/1000T + 1-Port 1000X SFP Gigabit Ethernet Switch
*Model Number : GSD-603F
* Produced by:
Manufacturer‘s Name : Planet Technology Corp.
Manufacturer‘s Address : 10F., No.96, Minquan Rd., Xindian Dist.,
New Taipei City 231, Taiwan, R.O.C.
is herewith confirmed to comply with the requirements set out in the Council Directive on the
Approximation of the Laws of the Member States relating to Electromagnetic Compatibility
Directive on 2014/30/EU; Low Voltage Directive 2014/35/EU.
For the evaluation regarding the EMC, the following standards were applied:
EN 55032 (2012+AC:2013)
EN 61000-3-2 (2014)
EN 61000-3-3 (2013)
EN 55024 (2010)
EN 60950-1 (2006+A11:2009+A1:2010+A12:2011+A2: 2013)
Responsible for marking this declaration if the:
Manufacturer Authorized representative established within the EU
Authorized representative established within the EU (if applicable):
Company Name: Planet Technology Corp.
Company Address: 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan,
R.O.C.
Person responsible for making this declaration
Name, Surname Kent Kang
Position / Title : Director
Taiwan
Aug. 9, 2017
Place
Date
Legal Signature
7. Customer Support
Thank you for purchasing PLANET products. You can browse
our online FAQ resource on PLANET web site rst to check
if it could solve your issue. If you need more support
information, please contact PLANET switch support team.
PLANET online FAQs:
http://www.planet.com.tw/en/support/faq
Switch support team mail address
support@planet.com.tw
Copyright © PLANET Technology Corp. 2021.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.