User Manual

ManualsBrandsPLANET Technology ManualsGigabit PoE Switch16-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T + 2-Port 1000X SFP Desktop Switch

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

1. Package Contents

Thank you for purchasing PLANET 16-Port 10/100/1000T 802.3at PoE+

Ethernet Switch, GSD-2022P. “802.3at PoE+ Switch” mentioned in

this Guide refers to the GSD-2022P.

Open the box of the 802.3at PoE+ Switch and carefully unpack it. The

box should contain the following items:

The 802.3at PoE+ Switch x 1 User’s Manual x 1 Power Cord x 1

SFP Dust Cap

x 2

Screws x 8

Rack-mounting

Brackets x 2

Rubber Feet x 4

If any of these pieces are missing or damaged, please contact your

dealer immediately; if possible, retain the carton including the original

packing material, and use them again to repack the product in case

there is a need to return it to us for repair.

 Hardware-based DIP switch for Standard, VLAN or Extend mode

selection;

− VLAN mode: Ports 1 to 16 cannot communicate with each

other, but can communicate with the uplink ports 17 to 18 and

SFP ports 19 to 20

− Extend mode: Ports 1 to 8 have data rate of 10Mbps. The

farthest transmission distance is up to 250 meters and all ports

can communicate with each other.

 VLAN mode is to isolate ports to prevent broadcast storm and

defendDHCPspoong

 Automatic address learning and address aging

 SupportsEnergy-EcientEthernet(EEE)function(IEEE802.3az)

 Hardware

 12-inchdesktopsize,1Uheight

 LED indicators for system power, per port PoE ready and PoE

activity, speed, Link/Act

 1silentfantoprovidestableandecientpowerperformance

 Supports contact discharge of ±6KV DC and air distance discharge

of ±8KV DC for Ethernet ESD protection

 Supports ±6KV surge immunity

3.ProductSpecications

Model GSD-2022P

HardwareSpecications

10/100/1000BASE-T

Copper Ports

18 auto MDI/MDIX

4.2 LED Indicators

 System

LED Color Function

PWR Green Lights to indicate the Switch has power.

 Per 10/100/1000BASE-T Port

LED Color Function

10/100/1000

LNK/ACT

Green

Lights to indicate the link through that

port is successfully established.

Blinks to indicate that the Switch is

actively sending or receiving data over

that port.

PoE in Use Amber

Lights to indicate the port is providing

PoE DC in-line power.

 Per 1000BASE-X SFP Interface

LED Color Function

1000

LNK/ACT

Green

Lights to indicate the link through that port

is successfully established at 1000Mbps.

Blinks to indicate that the Switch is actively

sending or receiving data over that port.

Switch

Throughput@64bytes

29.76Mpps

MAC Address Table 8K entries

Jumbo Frame 9216 bytes

Flow Control

IEEE 802.3x pause frame for full duplex;

back pressure for half duplex

Power over Ethernet

PoE Standard IEEE 802.3at Power over Ethernet Plus/PSE

PoE Injector Ports 16

PoE Power Supply

Type

End-span/Mid-span:1/2/4/5(+),3/6/7/8

(-)

PoE Power Output

Per port 54V DC, 300mA. max. 15.4 watts

(IEEE802.3af)

Per port 54V DC, 600mA. max. 32 watts

(IEEE802.3at)

PoE Power Budget 185 watts

Number of PDs, 7

watts

Number of PDs, 15.4

watts

Number of PDs, 30

watts

Standards Conformance

Regulatory

Compliance

FCC Part 15 Class A, CE

2. Product Features

 Physical Port

 16-port 10/100/1000BASE-T Gigabit RJ45 copper with IEEE

802.3at PoE+ injector function

 2 10/100/1000BASE-T Gigabit RJ45 copper interfaces

 2 1000BASE-X SFP slot interfaces

 Power over Ethernet

 Complies with IEEE 802.3at Power over Ethernet Plus end-span

PSE

 Up to 16 ports of IEEE 802.3af/802.3at devices powered (ports

1~16)

 Supports PoE power up to 32 watts for each PoE port, with a total

PoE budget of 185W

 Each port supports 54V DC power to PoE powered device

 Autodetectspowereddevice(PD)

 Supports PD alive function

 Circuit protection prevents power interference between ports

 Remote power feeding up to 100m in standard mode with 250m in

extend mode

 Switching

 Hardware-based 10/100/1000Mbps auto-negotiation and auto MDI/

MDI-X

 Supports IEEE802.3x ow control in full-duplex mode and back-

pressure in half-duplex mode

 Integrates address look-up engine, supporting 8K absolute MAC

addresses

 9Kjumboframesupportsallspeeds(10/100/1000Mbps)

1000BASE-X SFP

Slots

DIP Switch

Selectable operation mode

 Standard

 VLAN

 Extend

LED

 System:

Power(Green)

 10/100/1000T RJ45 Interfaces

10/100/1000LNK/ACT(Green),

PoE-in-Use(Amber)

 1000X SFP Interfaces

1000LNK/ACT(Green)

Dimensions

(WxDxH)

280x180x44mm(1Uheight)

Enclosure Metal

Weight 1810g

Power Requirements 100~240VAC,50/60Hz,5Amax.

Power Consumption/

Dissipation

Max. 201 watts/686 BTU

Thermal Fan 1

ESD Protection

Contact discharge of ±6KV DC,

Air discharge of ±8KV DC

Surge Protection ±6KV

Installation Desktop or rack-mount installation

Switching

Switch Architecture Store-and-Forward

Switch Fabric 40Gbps/non-blocking

Standards

Compliance

IEEE 802.3 10BASE-T

IEEE 802.3u 100BASE-TX

IEEE 802.3ab Gigabit 1000BASE-T

IEEE802.3zGigabitSX/LX

IEEE802.3xowcontrolandbackpressure

IEEE 802.3af Power over Ethernet

IEEE 802.3at Power over Ethernet Plus

IEEE802.3azEnergy-EcientEthernet

Environment

Operating

Temperature: 0 ~ 50 degrees C

Relative Humidity: 5~ 95%

(non-condensing)

Storage

Temperature: -10 ~ 70 degrees C

Relative Humidity: 5 ~ 95%

(non-condensing)

4. Hardware Introduction

4.1 Front Panel

The Front Panel of the 802.3at PoE+ Switch consists of 18 auto-sensing

10/100/1000Mbps Ethernet RJ45 ports and 2 1000BASE-X SFP slots.

The LED Indicators are also located on the front panel of the 802.3at

PoE+ Switch.

2 106 14 18 20

1 95 13 17 19

PoE Max

PWR

4 12

8 16

3 117 15

16-Port 10/100/1000T 802.3at PoE

2-Port

10/100/1000T

2-Port 1000X SFP Desktop Switch

19 20

1000X SFP

Standard

VLAN

Extend

PoE-in-Use

LNK

ACT

GSD-2022P

Figure 4-1: GSD-2022P Switch Front Panel

4.3 Multiple Functions of DIP Switch

The front panel of the 802.3at PoE+ Switch provides one DIP switch for

Standard, VLAN or Extend mode selection. The detailed descriptions

are shown in the following table.

DIP Switch Mode Function

Standard

VLAN

Extend

This mode makes the 802.3at PoE+ Switch

operate as a general switch and all PoE

ports operate at 10/100/1000Mbps auto-

negotiation. All ports can communicate with

one another.

Standard

VLAN

Extend

This mode makes the 802.3at PoE+ Switch

operate as a VLAN isolation switch and

1. Ports 1 to 16 will isolate respectively.

2. Ports 1 to 16 can only communicate with

ports17~18(uplinkports)andSFPports

19~20

Standard

VLAN

Extend

This mode makes the 802.3at PoE+ Switch

operate as a Long Reach PoE switch and

1. Ports 1 to 8 support farthest transmission

distance of up to 250 meters

2. Ports 1 to 8 have a data rate of 10Mbps

3. All ports can communicate with one

another.

Note

Please adjust the DIP switch before powering on the

802.3at PoE+ Switch.

Summary of content (2 pages)

PAGE 1
 Hardware-based DIP switch for Standard, VLAN or Extend mode selection; 1. Package Contents − VLAN mode: Ports 1 to 16 cannot communicate with each other, but can communicate with the uplink ports 17 to 18 and SFP ports 19 to 20 − Extend mode: Ports 1 to 8 have data rate of 10Mbps. The farthest transmission distance is up to 250 meters and all ports can communicate with each other. Thank you for purchasing PLANET 16-Port 10/100/1000T 802.3at PoE+ Ethernet Switch, GSD-2022P. “802.
PAGE 2
Standard Mode (default) Standard VLAN Extend 5. Hardware Installation PoE IP Camera 5.1 Rack Mounting PoE To install the 802.3at PoE+ Switch in a 19-inch standard rack, follow the instructions described below. GSD-2022P Power 100 meters (328 feet) PoE 100BASE-TX UTP with PoE VLAN Isolation Mode NVR Step 1: Place your 802.3at PoE+ Switch on a hard flat surface, with the front panel positioned towards your front side. Step 2: Attach a rack-mount bracket to each side of the 802.