User's Manual

9
2. Hardware Description
The switch provides three dierent running speeds – 10Mbps, 100Mbps and
1000Mbps, and automatically distinguishes the speed of the incoming connection.
This section describes the hardware features of the GSD-1008HP. For easier
management and control of the GSD-1008HP, familiarize yourself with its display
indicators and ports. Front panel illustrations in this chapter display the unit LED
indicators. Before connecting any network device to the GSD-1008HP, please read
this chapter carefully.
2.1 Front Panel
The front panel of the GSD-1008HP PoE+ Ethernet Switch consists of 10 auto-
sensing 10/100/1000Mbps Ethernet RJ45 ports. The LED indicators are also located
on the front panel of the GSD-1008HP.
4 6 82
1 3 5 7
9
1
PWR
53 7
2 6
4 8
9 10
PoE
PoE
GSD-1008HP
8-Port 10/100/1000T 802.3at PoE +
2-Port 10/100/1000T Desktop Switch
PoE-in-Use
ACTLNK
Standard
VLAN
Extend
10
Uplink
Figure 2-1: GSD-1008HP Switch Front Panel
The front panel of GSD-1008HP provides one DIP switch for Standard, VLAN
and Extend mode selections. The detailed descriptions are shown in the following
table.
DIP Switch Mode Function
Standard
VLAN
Extend
This mode makes the GSD-1008HP operate as a general
switch and all PoE ports operate at 10/100/1000Mbps auto-
negotiation.
Standard
VLAN
Extend
This mode makes the GSD-1008HP operate as a VLAN
isolation switch and
1. Port 1 to port 8 will isolate respectively.
2. Port 1 to port 8 can only communicate with port 9 and
port 10 (uplink port).