8-Port 10/100/1000T 802.
Copyright Copyright © 2017 by PLANET Technology Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of PLANET.
FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the Instruction manual, may cause harmful interference to radio communications.
Table Of Contents 1. Introduction................................................................................................ 5 1.1 Checklist.............................................................................................. 5 1.2 Product Description............................................................................... 5 1.3 Features.............................................................................................. 6 1.4 Specifications.....................................
1. Introduction 1.1 Checklist Check the contents of your package for the following parts: GSD-1008HP x 1 User’s Manual x 1 Power Cord x 1 Rubber Feet x 4 Rack-mounting Brackets Screws Package x 8 If any of these pieces are missing or damaged, please contact your dealer immediately; if possible, retain the carton including the original packing material, and use them again to repack the product in case there is a need to return it to us for repair. 1.
Ethernet Switch family, features up to 30 watts of power output for each port and a total PoE budget of 120 watts for eight 10/100/1000Mbps TP ports, and two 10/100/1000Mbps uplink ports. The eight 802.3at PoE+ ports provide PoE power injector function which is able to drive 8 IEEE 802.3at compliant powered devices.
Hardware zz 9-inch desktop size, 1U height, rack mountable zz LED indicators for system power, per port PoE ready and PoE activity, speed, Link/Act zz 1 silent fan to provide stable and efficient power performance zz Supports Energy-Efficient Ethernet (EEE) function (IEEE 802.3az) 1.4 Specifications Model GSD-1008HP Hardware Specifications Copper Port 10 10/100/1000BASE-T MDI/MDIX Ports PoE Injector Port 8-port with 802.
Enclosure Metal Weight 1260 g Power Requirements AC 100~240V, 50/60Hz, 2.5A max. Power Consumption/Dissipation Max. 120 watts/409.4 BTU Thermal Fan 1 Power over Ethernet PoE Standard IEEE 802.3af Power over Ethernet/PSE IEEE 802.3at Power over Ethernet Plus/PSE PoE Power Supply Type End-span PoE Power Output Per port 55V DC, 540mA. max. 30 watts Power Pin Assignment 1/2(+), 3/6(-) PoE Power Budget 120 watts Max. Number of Class 2 PDs 8 Max. Number of Class 3 PDs 8 Max.
2. Hardware Description The switch provides three different running speeds – 10Mbps, 100Mbps and 1000Mbps, and automatically distinguishes the speed of the incoming connection. This section describes the hardware features of the GSD-1008HP. For easier management and control of the GSD-1008HP, familiarize yourself with its display indicators and ports. Front panel illustrations in this chapter display the unit LED indicators.
This mode makes the GSD-1008HP operate as a VLAN isolation switch and 1. Port 1 to port 8 will isolate respectively. 2. Port 1 to port 8 can only communicate with port 9 and port 10 (uplink port). 3. 30-watt PoE transmit distance of 250m at speed of 10Mbps.
2.1.1 LED Indicators System LED Color PWR Green Function Lights to indicate that the Switch has power. Per 10/100/1000Mbps Port LED PoE-in-use Color Function Lights to indicate the port is providing 55V DC in-line power. (1-8 ports) Orange Green Lights to indicate the Switch is successfully connecting to the network at 1000Mbps. Blinks to indicate that the Switch is actively sending or receiving data over that port.
3. Hardware Installation Start up Please refer to the following for your cabling: 10/100/1000BASE-T All 10/100/1000BASE-T ports come with Auto-Negotiation capability. They automatically support 1000BASE-T, 100BASE-TX and 10BASE-T networks. Users only need to plug a working network device into one of the 10/100/1000BASE-T ports, and then turn on the GSD-1008HP. The port will automatically run in 10Mbps, 20Mbps, 100Mbps, 200Mbps, 1000Mbps or 2000Mbps after the negotiation with the connected device.
3.1 Desktop Installation To install the GSD-1008HP on desktop, simply follow the following steps: Step 1: Attach the rubber feet to the recessed areas on the bottom of the GSD1008HP, as shown in Figure 3-1. 2 2 4 6 8 1 3 5 7 PoE PWR GSD-1008 HP 9 PoE 1000 10/100 LNK LNK PoE In-Us e 4 6 ACT ACT 8 10 Standard VLAN Extend 1 3 5 8-Port 10 2-Port 10/100/1000T 80 2.
Step 5: Supply power to the GSD-1008HP. A. Connect one end of the power cable to the GSD-1008HP. B. Connect the power plug of the power cable to a standard wall outlet. When the GSD-1008HP receives power, the Power LED should remain solid Green. 3.2 Rack Mounting To install the GSD-1008HP in a 19-inch standard rack, follow the instructions described below. Step 1: Place your GSD-1008HP on a hard flat surface, with the front panel positioned towards your front side.
Step 5: After the brackets are attached to the GSD-1008HP, use suitable screws to securely attach the brackets to the rack, as shown in Figure 3-3. 2 2 4 6 8 1 3 5 7 PoE PWR GSD-1008HP 9 PoE 1000 10/100 LNK LNK PoE In-Use 4 6 ACT ACT 8 10 Standard VLAN Extend 1 3 5 8-Port 10/10 2-Port 10/100/1000T 802.3 at PoE + 0/1000T Desktop Switch 7 9 Uplink 10 Figure 3-3: Mounting the GSD-1008HP in a Rack Step 6: Proceed with Steps 4 and 5 of session 3.
RJ45 UTP Cable 100-240V AC 50/60Hz, 1.
4. Troubleshooting This chapter contains information to help you solve issues. If the GSD-1008HP is not functioning properly, make sure the GSD-1008HP was set up according to instructions in this manual. Q1: The Link LED is not lit. Solution: Check the cable connection and also try to swap one new cable. Q2: 1000BASE-T port link LED is lit, but the traffic is irregular. Solution: Make sure the attached device is not set to full duplex. Some devices use a physical or software switch to change duplex modes.
Appendix A - Networking Connection A.1 Switch’s Data RJ45 Pin Assignments - 1000Mbps, 1000BASE-T PIN NO MDI MDI-X 1 BI_DA+ BI_DB+ 2 BI_DA- BI_DB- 3 BI_DB+ BI_DA+ 4 BI_DC+ BI_DD+ 5 BI_DC- BI_DD- 6 BI_DB- BI_DA- 7 BI_DD+ BI_DC+ 8 BI_DD- BI_DC- Implicit implementation of the crossover function within a twisted-pair cable, or at a wiring panel, while not expressly forbidden, is beyond the scope of this standard. A.
The standard cable, RJ45 pin assignment The standard RJ45 receptacle/connector There are 8 wires on a standard UTP/STP cable and each wire is color-coded.
