Datasheet

GSD-1008HP
2
Two Gigabit Uplink Ports
The GSD-1008HP comes with two uplink ports with 1000Mbps transfer rate to ensure high-speed data and video transmission, reliable assurance for
connection between the surveillance system and outside network where the eight PoE+ ports can be used to their full potential.
Powered Device Alive Check
The GSD-1008HP adopts not only Power over Ethernet technology, but also automated PD monitoring and real-time PoE status.
The PD alive check feature is applied in Standard, VLAN and Extend modes. After the PoE of the port is powered on, the device starts to detect whether the
portistransmittingdata.Ifthe portdoesnottransmitdataandthedurationexceedsaspecictime,PoEwillautomaticallypoweroffandthenre-power.Italso
will greatly enhance the network reliability in that the PoE port will reset the PD power, thus reducing administrator’s management burden.
Extend Mode
Power
250 meters (820 feet)
Standard Mode (default)
Power
PoE IP Camera
PoE
100 meters (328 feet)
GSD-1008HP
PoE
VLAN Isolation Mode
NVR
Ports 9 to 10
Ports 1~8 Access Permitted
PC
PoE
PoE
PoE
PoE
10BASE-T UTP with PoE
PoE
1000BASE-T UTP with PoE
1000BASE-T UTP
GSD-1008HP
PoE IP Camera
IP Camera
IP Camera
IP Camera
Ports 1 to 8
Access Denied
Standard
VLAN
Extend
GSD-1008HP
Standard
VLAN
Extend
Standard
VLAN
Extend