User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN setting example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 Quality of Service
- 4.9 Security
- 4.10 ACL
- 4.11 MAC Address Table
- 4.12 LLDP
- 4.13 Diagnostics
- 4.14 RMON
- 4.15 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A
- GSD-1002M
User’s Manual of GSD-1002M
Enable or d
isable the port error disabled function to check status by ARP rate
limit
ARP Rate Limt
Buttons
: Click to apply changes.
Figure 4-3-14 Error Disabled Information page screenshot
The page includes the following fields:
Object Description
Displa
y the current recovery interval time.
Recovery Interval
Displa
y the current BPDU guard status.
BPDU Guard
Displa
y the current self loop status.
Self Loop
Displa
y the current broadcst flood status.
Broadcast Flood
Displa
y the current unknown multicast flood status.
Unknown Multicast
Flood
Displa
y the current unicast flood status.
Unicast Flood
Displa
y the current ACL status.
ACL
Port Security Violation
Display the current port security violation status.
Displa
y the current DHCP rate limit status.
DHCP Rate Limit
Displa
y the current ARP rate limit status.
ARP Rate Limt
79