User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN setting example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 Quality of Service
- 4.9 Security
- 4.10 ACL
- 4.11 MAC Address Table
- 4.12 LLDP
- 4.13 Diagnostics
- 4.14 RMON
- 4.15 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A
- GSD-1002M
User’s Manual of GSD-1002M
Figure 4-10-12 IPv6-based ACE Table page screenshot
The page includes the following fields:
Object Description
Displa
y the current ACL name
ACL Name
Displa
y the current sequence
Sepuence
Displa
y the current action
Action
Displa
y the current protocol
Protocol
Displa
y the current source IP address
Source IP Address
Displa
y the current source IP address wildcard mask
Source IP Address
Wildcard Mask
Destination IP Address
Display the current destination IP address
Destination IP Address
Wildcard Mask
Display the current destination IP address wildcard mask
Displa
y the current source port range
Source Port Range
Displa
y the current destination port range
Destination Port
Range
Displa
y the current flag set
Flag Set
Displa
y the current DSCP
DSCP
Displa
y the current IP precedence
IP Precedence
Displa
y the current ICMP Type
ICMP Type
Displa
y the current ICMP code
ICMP Code
Modify
Click
to edit IPv6-based ACL parameter.
Click
to delete IPv6-based ACL entry.
265