User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN setting example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 Quality of Service
- 4.9 Security
- 4.10 ACL
- 4.11 MAC Address Table
- 4.12 LLDP
- 4.13 Diagnostics
- 4.14 RMON
- 4.15 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A
- GSD-1002M
User’s Manual of GSD-1002M
Displa
y the current sequence
Sepuence
Displa
y the current action
Action
Destination MAC Address
Display the current destination MAC address
Destination MAC Address
Mask
Display the current destination MAC address mask
Displa
y the current source MAC address
Source MAC Address
Source MAC Address Mask
Display the current source MAC address mask
Displa
y the current VLAN ID
VLAN ID
Displa
y the current 802.1p value
802.1p
Displa
y the current 802.1p mask
802.1p Mask
Displa
y the current Ethernet type
Ethertype
Modify
Click
to edit MAC-based ACL parameter.
Click
to delete MAC-based ACL entry.
4.10.3 IPv4-based ACL
This page shows the ACL status by different ACL users. Each row describes the ACE that is defined. It is a conflict if a specific
ACE is not applied to the hardware due to hardware limitations. IPv4-based ACL screens in Figure 4-10-5 & Figure 4-10-6
appear.
Figure 4-10-5 IPv4-based ACL page screenshot
The page includes the following fields:
Object Description
Create a na
med IPv4-based ACL list
ACL Name
Buttons
: Click to add ACL name list.
253