User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN setting example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 Quality of Service
- 4.9 Security
- 4.10 ACL
- 4.11 MAC Address Table
- 4.12 LLDP
- 4.13 Diagnostics
- 4.14 RMON
- 4.15 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A
- GSD-1002M
User’s Manual of GSD-1002M
Enable or d
isable DoS check mode by UDP blat
UDP Blat
Enable or d
isable DoS check mode by TCP blat
TCP Blat
Enable or d
isable DoS check mode by POD
POD
Enable or d
isable DoS check mode by IPv6 min fragment
IPv6 Min Fragment
Enable or d
isable DoS check mode by ICMP fragment
ICMP Fragments
Enable or d
isable DoS check mode by IPv4 ping max size
IPv4 Ping Max Size
Enable or d
isable DoS check mode by IPv6 ping max size
IPv6 Ping Max Size
Ping Max Size Setting
Set the max size for ping
Enable or d
isable DoS check mode by smurf attack
Smurf Attack
Enable or d
isable DoS check mode by TCP min hdr size
TCP Min Hdr Size
Enable or d
isable DoS check mode by TCP-syn (sport < 1024)
TCP-SYN (SPORT <
1024)
Enable or d
isable DoS check mode by null scan attack
Null Scan Attack
Enable or d
isable DoS check mode by x-mas scan attack
X-Mas Scan Attack
Enable or d
isable DoS check mode by TCP syn-fin attack
TCP SYN-FIN Attack
TCP SYN-RST Attack
Enable or disable DoS check mode by TCP syn-rst attack
TCP Fragment (Offset
= 1)
Enable or disable DoS check mode by TCP fragment (offset = 1)
Buttons
: Click to apply changes.
243