User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN setting example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 Quality of Service
- 4.9 Security
- 4.10 ACL
- 4.11 MAC Address Table
- 4.12 LLDP
- 4.13 Diagnostics
- 4.14 RMON
- 4.15 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A
- GSD-1002M
User’s Manual of GSD-1002M
Figure 4-9-40 DHCP Snooping Database Setting page screenshot
The page includes the following fields:
Object Description
Select data
base type.
Database Type
The name of file imag
e.
File Name
Fill in yo
ur remote server IP address.
Remote Server
Specif
y the duration for which the transfer should be delayed after the binding
database changes. The range is from 15 to 86400 seconds. The default is 300
seconds (5 minutes).
Write Delay
Timeout
Specify when to stop the database transfer process after the binding database
changes.
The range is from 0 to 86400. Use 0 for an infinite duration. The default is 300
seconds (5 minutes).
Buttons
: Click to apply changes.
Figure 4-9-41 DHCP Snooping Database Information page screenshot
225