Datasheet

GSD-1002M
2
• Strict priority and Weighted Round Robin (WRR) CoS
policies
Multicast
• Supports IGMP Snooping v2 and v3
• Supports MLD Snooping v1 and v2
• IGMP Querier mode support
• IGMPSnoopingportltering
• MLDSnoopingportltering
Security
• Authentication
–
IEEE 802.1X Port-based network access authentication
–
Built-in RADIUS client to co-operate with the RADIUS
servers
–
RADIUS / TACACS+ login user access authentication
• Access Control List
–
IPv4 / IPv6 IP-based ACL
–
MAC-based ACL
• MAC Security
–
Static MAC
–
MAC Filtering
• PortSecurityforSourceMACaddressentriesltering
• DHCPSnoopingtolterdistrustedDHCPmessages
• Dynamic ARP Inspection discards ARP packets with
invalid MAC address to IP address binding
• IPSourceGuardpreventsIPspoongattacks
• DoS Attack Prevention
• SSH / SSL
Management
• IPv4 and IPv6 dual stack management
• Switch Management Interface
–
Web switch management
–
Telnet Command Line Interface
–
SNMP v1, v2c and v3
–
SSH / SSL secure access
• User Privilege Levels Control
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System Maintenance
–
Firmware upload/download via HTTP / TFTP
–
Congurationupload/downloadthroughWebinterface
–
Dual Images
–
Hardware reset button for system reboot or reset to
factory default
• SNTP Network Time Protocol
• Cable Diagnostics
• Link Layer Discovery Protocol (LLDP) Protocol and
LLDP-MED
• SNMP trap for interface Link Up and Link Down
notication
• Event message logging to remote Syslog server
• Four RMON groups (history, statistics, alarms, and events)
• PLANET Smart Discovery Utility
Handheld Size for FTTD Solution
The GSD-1002M provides high-performance edge service and plug-and-play design for
FTTD (Fiber to the Desktop) solutions. FTTD service is fiber optic cabling with reliable
and expandable, lower-cost wiring architectures, and long distance capability. The GSD-
1002M supports dual-speed, 100Base-FX and 1000Base-SX/LX SFP (Small Form-factor
Pluggable) fiber-optic modules to connect fiber access point, with high flexibility to be
installed in communication closet or major computer room for SMBs.
Extending Network Infrastructure for SOHOs, SMBs and Workgroups
Since port 8 of the GSD-1002M provides PoE PD power in-line and 12V DC in
interface, it can obtain PoE power from any 802.3af/at PoE PSE equipment. The
GSD-1002M is with non-blocking design and handheld size, and extends 8-port
10/100/1000Mbps Gigabit Ethernet and 2-port extra 100Base-FX / 1000Base-SX/LX
SFP fiber-optic modules, bringing network infrastructure higher flexibility but lower in
cost.
Applications
12V DC 12V DCPoE In
IPTVPC IPTVPC
DC
PoE
PoE In
DC
PoE
DC
Power Line (DC)
1000Base-T UTP
PoE
1000Base-T UTP with PoE
100 meters
PoE
PoE
PC
100 meters
100 meters
120 km
2 km
802.3af/at
PoE Equipment
GSD-1002M
No Power Supply Required
Laptop
Core Switch
Distributed Switch
1000Base-SX/LX Fiber-optic
1000
1000Base-T UTP
PoE
1000Base-T UTP with PoE
1000
1000