Datasheet

Data Sheet
1
GSD-1002M
1
8-Port 10/100/1000Mbps + 2-Port 100/1000X SFP
Managed Desktop Switch
PLANET GSD-1002M is an 8-port 10/100/1000Mbps + 2-port 100/1000X SFP
Managed Desktop Switch specially designed to build a reliable full Gigabit backbone
to transmit and forward data to remote network through fiber optic. It provides 8-port
10/100/1000Base-T copper and 2 extra 100/1000Base-X SFP fiber optic interfaces
with dual power system. Besides support for 20Gbps switch fabric to handle extremely
large amounts of video, voice and important data in a secure topology, the GSD-1002M
provides user-friendly but advanced IPv6 / IPv4 management interface and abundant L2
/ L4 switching functions. It is the best investment for businesses/SOHOs expanding or
upgrading their network infrastructure.
IPv6 / IPv4 Full-functioned Secure Switch
The GSD-1002M is the ideal solution to fulfilling the demand of IPv6 management
Gigabit Ethernet Switch. It supports both IPv4 and IPv6 management functions and
can work with original network structure. It provides advanced Layer 2 to Layer 4 data
switching and Quality of Service traffic control, Access Control List, network access
control and authentication, and Secure Management features to protect building
automation network connectivity with reliable switching recovery capability that is suitable
for implementing fault tolerant and mesh network architectures.
Spanning Tree Protocol and Dual Power Input for High Available Network
System
The GSD-1002M features strong rapid self-recovery capability to prevent interruptions
and external intrusions. It incorporates Spanning Tree Protocol (802.1s MSTP), auto loop
protection and dual power input system (PoE In + 12V DC) into customer’s automation
network to enhance system reliability and uptime. In the example below, PoE power has
failed with dropped cable and DC power will run hardware failover function automatically
to keep powering the switch without any loss.
Physical Ports
• 8 10/100/1000Mbps Gigabit Ethernet ports with auto-MDI/
MDI-X supported
• 1 port (Port 8) supports 802.3af/at PoE 48~56V DC in-line
power
• 2 100/1000Base-X mini-GBIC/SFP slots
Installation
• Dual Power Design
–
802.3af/at PoE In
–
12V DC power adapter acceptable
Layer 2 Features
• Prevents packet loss with back pressure (half-duplex) and
IEEE802.3xpauseframeowcontrol(full-duplex)
• High performance Store and Forward architecture,
broadcaststormcontrol,runt/CRClteringeliminates
erroneous packets to optimize the network bandwidth
• Supports VLAN
–
IEEE 802.1Q tagged VLAN
–
Provider Bridging (VLAN Q-in-Q) support (IEEE
802.1ad)
–
Protocol VLAN
–
Voice VLAN
–
Private VLAN
–
Management VLAN
–
GVRP
• Supports Spanning Tree Protocol
–
STP (Spanning Tree Protocol)
–
RSTP (Rapid Spanning Tree Protocol)
–
MSTP (Multiple Spanning Tree Protocol)
–
STP BPDU Guard, BPDU Filtering and BPDU
Forwarding
• Supports Link Aggregation
–
IEEE 802.3ad Link Aggregation Control Protocol
(LACP)
–
Cisco ether-channel (Static Trunk)
–
Maximum 8 trunk groups, up to 8 ports per trunk group
• Provides Port Mirror (many-to-1)
• Loop protection to avoid broadcast loops
Quality of Service
• Ingress / Egress Rate Limit per port bandwidth control
• Storm Control support
–
Broadcast / Unknown-Unicast / Unknown-Multicast
• Trafcclassication
–
IEEE 802.1p CoS
–
TOS / DSCP / IP Precedence of IPv4/IPv6 packets