User's Manual

User’s Manual of GS-6322 Managed Switch Series
20
1.4 Product Features
 Physical Port
 24 10/100/1000BASE-T Gigabit RJ45 copper ports with 24-port IEEE 802.3bt PoE++ injector function
 2 10GBASE-T RJ45 interfaces with auto MDI/MDI-X function
 2 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP and 2.5G SFP transceiver
 RJ45 console interface for switch basic management and setup
 Power Management
 Dual redundant modular power supply slots
 Supports configurable power operation modes
- Redundant Power Supply (RPS, 1+1): Provides 1+1 power redundancy when two PSUs are installed.
- Extended Power Supply (EPS, 2+0): Provides more power budget by combining two PSUs to share the maximum
power budget
 Active-active redundant power failure protection
 Backup of catastrophic power failure on one supply
 Fault tolerance and resilience
 802.3bt Power over Ethernet
 Complies with IEEE 802.3bt Power over Ethernet Plus Plus
 Backward compatible with IEEE 802.3at Power over Ethernet Plus
 Up to 24 ports of IEEE 802.3af/IEEE 802.3at/IEEE 802.3bt PoE devices powered
 24 PoE ports with built-in 802.3bt PoE++ Type-4 90W injector function
 Auto detects powered device (PD)
 Circuit protection prevents power interference between ports
 Remote power feeding up to 100 meters
 PoE management features
− Total PoE power budget control
− Per port PoE function enable/disable
− PoE admin-mode control
− PoE port power feeding priority
− Per PoE port power limit
− PD classification detection
− PoE extend mode control to support power feeding up to a distance of up to 200 meters
 Intelligent PoE features
− Temperature threshold control
− PoE usage threshold control
− PD alive check
− PoE schedule
 Layer 3 Features
 IP dynamic routing protocol supports OSPFv2
 IPv4/IPv6 hardware static routing
 Routing interface provides per VLAN routing mode
 IP interfaces (Max. 128 VLAN interfaces)
 Routing table (Max. 128 routing entries)