Quick Guide

6
3. Terminal Setup
To congure the system, connect a serial cable to a RS232 COM port on a PC or
notebookcomputerandtoRJ45typeofserialportoftheManagedPoESwitch.
Managed Switch
PC / Workstation
with
Terminal Emulation Software
Serial Port
RS232 to RJ45 Cable
Console Port
RJ45
Figure 3-1: Managed PoE Switch Console Connectivity
A terminal program is required to make the software connection to the Managed
PoESwitch.
1. Run terminal program on the OS.
2.When the following screen appears, make sure that the COM port should be
conguredas:
z Baud:115200
z Data bits: 8
z Parity:None
z Stop bits: 1
z Flowcontrol:None
Figure 3-2: COM Port Conguration