Datasheet

2
GS-6322-24P4X
Layer 2 Features
• Prevents packet loss with back pressure (half-duplex) and
IEEE802.3xpauseframeowcontrol(full-duplex)
• High performance of Store-and-Forward architecture and
runt/CRClteringeliminateserroneouspacketstooptimize
the network bandwidth
• Storm Control support
– Broadcast/multicast/unknown unicast
• Supports VLAN
– IEEE 802.1Q tagged VLAN
– Out of 4094 VLAN IDs
– Supports provider bridging (VLAN Q-in-Q, IEEE 802.1ad)
– Private VLAN Edge (PVE)
– Protocol-based VLAN
– MAC-based VLAN
– Voice VLAN
– GVRP (GARP VLAN Registration Protocol)
• Supports Spanning Tree Protocol
– IEEE 802.1D Spanning Tree Protocol (STP)
– IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
– IEEE 802.1s Multiple Spanning Tree Protocol (MSTP),
spanning tree by VLAN
– BPDU Guard
• Supports Link Aggregation
– 802.3ad Link Aggregation Control Protocol (LACP)
– Cisco ether-channel (static trunk)
– Maximum 4 trunk groups with 4 ports for each trunk
group
– Up to 80Gbps bandwidth (full duplex mode)
• Provides port mirror (many-to-1)
• Portmirroringtomonitortheincomingoroutgoingtrafcon
a particular port
• Loop protection to avoid broadcast loops
• Supports ERPS (Ethernet Ring Protection Switching)
• Compatible with Cisco uni-directional link detection(UDLD)
that monitors a link between two switches and blocks the
ports on both ends of the link if the link fails at any point
between the two devices
• Link Layer Discovery Protocol (LLDP)
Quality of Service
• Ingress Shaper and Egress Rate Limit per port bandwidth
control
• 8 priority queues on all switch ports
• Trafcclassication
PSU Operation mode
Redundant Power
Supply mode
Extended Power
System mode
Power Redundancy ■ --
PoE budget with 1 1200W PSU 1000W 1000W
PoE budget with 2 1200W PSUs 1000W 2200W
The GS-6322-24P4X can work with three optional 920W/1200W/2000W AC
power supplies. Users can flexibly use one or dual power supply according to
their application. Its flexible redundant and extended power system is specifically
designed for high-tech facilities requiring the highest power integrity.
For example
90~95-watt 802.3bt PoE++ and Advanced PoE Power Output Mode
Management
As the GS-6322-24P4X adopts the IEEE 802.bt PoE++ standard and PoH
technology, it is capable to source up to 95 watts of power by using all the four
pairs of standard Cat5e/6 Ethernet cabling to deliver power and full-speed data to
each remote PoE compliant powered device (PD). To meet the demand of various
powered devices consuming stable PoE power, the GS-6322-24P4X PoE++ Switch
providesvedifferentPoEpoweroutputmodesforselection.
■95WUPOE/PoH
■90W802.3btPoE++
■60WForce
■36WEnd-spanPoE
■36WMid-spanPoE
10GBASE-T and 10GBASE-X SFP Dual Media Interfaces
The GS-6322-24P4X features built-in hardware-based L2 and L3 switching engine
along with 24 10/100/1000BASE-T ports, 2 10GBASE-T RJ45 ports and 2
additional 10GBASE-X SFP+ ports. With two built-in 10GBASE-T copper interfaces
with 5-speed (10G/5G/2.5G/1G/100) auto-negotiation, the GS-6322-24P4X provides
10Gbps data transmission with the existing Cat6A/Cat7 UTP cabling, meaning
the speed can be increased without costs. The additional two 10GBASE-X
SFP+ interfaces with 3 speeds (10G/2.5G/1G) are provided for a long-distance
transmission of up to 120km.
RJ45 Type Console Port
2 x 10G SFP+ Port
24 x 802.3bt PoE++ Type 4 Port 2 x 10GBASE-T Port