Datasheet

GS-6320-8P2X
3
Multicast
• Supports IGMP Snooping v1, v2 and v3
• Supports MLD Snooping v1 and v2
• Querier mode support
• IPv4IGMPSnoopingportltering
• IPv6MLDSnoopingportltering
• Multicast VLAN Registration (MVR) support
Security
• Authentication
– IEEE 802.1x Port-based/MAC-based network access
authentication
– Built-in RADIUS client to co-operate with the RADIUS
servers
– TACACS+ login users access authentication
– RADIUS/TACACS+ users access authentication
– Guest VLAN assigns clients to a restricted VLAN with
limited services
• Access Control List
– IP-based Access Control List (ACL)
– MAC-based Access Control List
• Source MAC/IP address binding
• DHCP Snoopingtolterun-trustedDHCPmessages
• Dynamic ARP Inspection discards ARP packets with
invalid MAC address to IP address binding
• IP Source Guard preventsIPspoongattacks
• Auto DoS rule to defend DoS attack
• IPaddressaccessmanagementtopreventunauthorized
intruder
Management
• IPv4 and IPv6 dual stack management
• Switch Management Interfaces
– Web switch management
– Console and Telnet Command Line Interface
– SNMP v1 and v2c switch management
– SSHv2, TLSv1.2 and SNMPv3 secure access
• IPv6 IP Address/NTP/DNS management
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System Maintenance
– Firmware upload/download via HTTP/TFTP
– Reset button for system reboot or reset to factory default
– Dual Images
• DHCP Relay
Scheduled Power Recycling
The GS-6320-8P2X allows each of the connected PDs to reboot at a specified
time each week. Therefore, it will reduce the chance of PD crash resulting from
bufferoverow.
S M T W T F S
Automatically Reboot
Every Friday 23:00
PoE PT Camera
ON ON
PoE
OFF
CPU/Buffer
Load 85%
CPU/Buffer
Load 10%
PoE Schedule for Energy Saving
Besides being used for IP surveillance, the GS-6320-8P2X is certainly applicable to
build any PoE network including VoIP and wireless LAN. Under the trend of energy
saving worldwide and contributing to the environmental protection on the Earth,
the GS-6320-8P2X can effectively control the power supply besides its capability
of giving high watts power. The “PoE schedule” function helps you to enable or
disablePoEpowerfeedingforeachPoEportduringspeciedtimeintervals andit
is a powerful function to help SMBs and enterprises save energy and budget.
Power
On
Power
On
Power
On
Power
On
6 Watts 6 Watts 12 Watts 12 Watts
PoE
PoE PoE
PoE
Power
Off
Power
Off
Power
Off
Power
On
6 Watts 6 Watts 12 Watts 12 Watts
PoE
PoE PoE
PoE
PoE
1000Base-T UTP with PoE
Total consumption of 36 watts/hr
5PM8AM 5PM 8AM
Save 24 watts/hr during off-business hours
Total Saved = 10800 Watts/month
PoE Power and Ethernet Data Transmission Distance Extension
In the “Extend” operation mode, the GS-6320-8P2X operates on a per-port basis
at 10Mbps duplex operation but can support 22-watt PoE power output over a
distance of up to 200 meters overcoming the 100m limit on Ethernet UTP cable.
With this brand-new feature, the GS-6320-8P2X provides an additional solution
for 802.3at/af PoE distance extension, thus saving the cost of Ethernet cable
installation.
Extend Mode
Power
200 meters (656 feet)
PoE
GS-6320-8P2X
PoE
10BASE-T UTP with PoE
PoE IP Camera