Installation Guide

9
ConguringIPAddress
3.At the “#” prompt, enter the following command and press <Enter> as shown
inFigure4-5.
GS-6320-46S2C4XR#congureterminal
GS-6320-46S2C4XR(cong)#interfacevlan1
GS-6320-46S2C4XR(cong-if-vlan)#ipaddress192.168.1.100255.255.255.0
Figure 4-5: Conguring IP Address Screen
The previous command would apply the following settings for the L3 Managed
Switch.
IPAddress:192.168.1.100
Subnet Mask: 255.255.255.0
4.Repeatstep1tocheckiftheIPaddressischanged.
If the IP is successfully congured, the L3 Managed Switch will apply the new IP
address setting immediately. You can access the Web interface of the L3 Managed
SwitchthroughthenewIPaddress.