Datasheet

2
GS-6320-46S2C4XR
– 802.3ad Link Aggregation Control Protocol (LACP)
– Cisco ether-channel (static trunk)
– Maximum 26 trunk groups, up to 16 ports per trunk group
• Provides port mirror (many-to-1)
• Portmirroringtomonitortheincomingoroutgoingtrafcona
particular port
• Loop protection to avoid broadcast loops
• Compatible with Cisco uni-directional link detection(UDLD)
that monitors a link between two switches and blocks the
ports on both ends of the link if the link fails at any point
between the two devices
• Supports G.8032 ERPS (Ethernet Ring Protection Switching)
Quality of Service
• Ingress Shaper and Egress Rate Limit per port bandwidth
control
• 8 priority queues on all switch ports
• Trafcclassication
– IEEE 802.1p CoS
– TOS/DSCP/IP Precedence of IPv4/IPv6 packets
– IP TCP/UDP port number
– Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS policies
• Supports QoS and In/Out bandwidth control on each port
• Trafcpoliciesontheswitchport
• DSCP remarking
Multicast
• Supports IPv4 IGMP Snooping v1, v2 and v3
• Supports IPv6 MLD Snooping v1 and v2
• Querier mode support
• IPv4IGMPSnoopingportltering
• IPv6MLDSnoopingportltering
• Multicast VLAN Registration (MVR) support
Security
• Authentication
– IEEE 802.1x port-based/MAC-based network access
authentication
– IEEE 802.1x authentication with guest VLAN
– Built-in RADIUS client to cooperate with the RADIUS
servers
– RADIUS/TACACS+ users access authentication
– Guest VLAN assigns clients to a restricted VLAN with
limited services
Layer 3 Dynamic Routing Support
The GS-6320-46S2C4XR enables the administrator to conveniently boost network
efficiency by configuring Layer 3 IPv4/IPv6 VLAN static routing manually, and the
OSPFv2 (Open Shortest Path First) settings automatically. The OSPF is an interior
dynamic routing protocol for autonomous system based on link state. The protocol
creates a database for link state by exchanging link states among Layer 3 switches,
and then uses the Shortest Path First algorithm to generate a route table based on
that database.
Network with Cybersecurity Helps Minimize Security Risks
The GS-6320-46S2C4XR comes with enhanced cybersecurity to fend off
cyberthreats and cyberattacks.Iit supports SSHv2, TLS and SSL protocols to provide
strong protection against advanced threats. Served as a key point to transmit data
to customer's critical equipment in a business network, the cybersecurity feature
of the GS-6320-46S2C4XR protects the switch management and enhances the
security of the mission-critical network without any extra deployment cost and effort.
Redundant Ring, Fast Recovery for Critical Network Applications
The GS-6320-46S2C4XR supports redundant ring technology and features strong,
rapid self-recovery capability to prevent interruptions and external intrusions. It
incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching)
technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input
system into customer’s automation network to enhance system reliability and uptime
in harsh factory environments. In a certain simple Ring network, the recovery time
could be less than 10ms to quickly bring the network back to normal operation.
1000
1000
1000
1000
1000
PoE
Industrial
PoE Switch
Industrial
PoE Switch
PoE
GS-6320-46S2C4XR
8-Port MAN Switch
MAN Switch
Factory
Highway
Office
Control Center
ERPS Ring for Metropolitan Area Network Application
Recovery Time < 10ms
AC and DC Redundant Power to Ensure Continuous Operation
The GS-6320-46S2C4XR is equipped with one 100~240V AC power supply unit
and one additional 36-60V DC power supply unit for redundant power supply. A
redundant power system is also provided to enhance the reliability with either AC
or DC power supply unit. The redundant power system is specifically designed to
handle the demands of high-tech facilities requiring the highest power integrity.