Quick Guide

8
4.Repeatstep1tocheckiftheIPaddresshaschanged.
If the IP is successfully congured, the Managed PoE Switch will apply the new IP
addresssetting immediately. You canaccessthe Webinterface oftheManaged PoE
SwitchthroughthenewIPaddress.
3.3 StoringCurrentSwitchConguration
In the Managed PoE Switch, the running conguration sequence running-cong
can be saved from the RAM to FLASH by “copy” command, so that the running
conguration sequence becomes the start-up conguration le, which is called
congurationsave.
Atthe“#”prompt,enterthefollowingcommandandpress<Enter>.
#copyrunning-congstartup-cong
Figure 3-6: Saving Current Conguration Command Screen
Note
If you are not familiar with the console command or the related
parameter, enter “help” anytime in console to get the help
description.