(V4) Datasheet

GS-5220-48P4X
GS-5220-48PL4XR
3
• Supports QoS and In/Out bandwidth control on each port
• Trafc-policingontheswitchport
• DSCP remarking
Multicast
• Supports IPv4 IGMP snooping v1, v2 and v3
• Supports IPv6 MLD snooping v1 and v2
• Querier mode support
• IPv4IGMPsnoopingportltering
• IPv6MLDsnoopingportltering
• Multicast VLAN Registration (MVR) support
Security
• Authentication
– IEEE 802.1x port-based/MAC-based network access
authentication
– Built-in RADIUS client to cooperate with the RADIUS
servers
– TACACS+ login users access authentication
– RADIUS/TACACS+ users access authentication
– Guest VLAN assigns clients to a restricted VLAN with
limited services
• Access Control List
– IP-based Access Control List (ACL)
– MAC-based Access Control List
• Source MAC/IP address binding
• DHCPSnoopingtolteruntrustedDHCPmessages
• Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
• IPSourceGuardprevents IPspoongattacks
• IPaddressaccessmanagementtopreventunauthorized
intruder
Management
• IPv4 and IPv6 dual stack management
• Switch Management Interfaces
– Console/Telnet Command Line Interface
– Web switch management
– SNMP v1, v2c, and v3 switch management
– SSHv2, TLSv1.2 secure access
• SNMP Management
– Four RMON groups (history, statistics, alarms and events)
– SNMPtrapforinterfaceLinkUpandLinkDownnotication
• IPv6 IP address/NTP/DNS management
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
Convenient and Smart ONVIF Devices with Detection Feature
PLANET has newly developed an awesome feature -- ONVIF Support -- which is
specifically designed for co-operating with Video IP Surveillances. From the GS-5220-
48P4X series’ GUI, clients just need one click to search and show all of the ONVIF
devices via network application. In addition, clients can upload floor images to switch
and allows for deployment location of surveillance devices for easier inspection and
planning.Moreover,clientscangetreal-timesurveillance’sinformationandonline/ofine
status, and also allows PoE reboot control from GUI.
Ground 100~240V AC Power
36~60V DC Power
CentralizedPowerManagementforGigabitEthernetPoENetworking
TofullltheneedsofhigherpowerrequiredPoEnetworkapplicationswithGigabitspeed
transmission, the GS-5220-48P4X series features IEEE 802.3at PoE+ that combines
up to 36 watts of power output and data per port over one Cat5E/6 Ethernet cable. It
is designed specifically to meet the demand of higher power consuming network PD
(powered device) such as IR, PTZ, speed dome cameras or even box-type IP camera
with a built-in fan and heater. Compliant with both 802.3at and 802.3af PoE, it allows
moreexibilityinpowerrequirementforavarietyofPDs.
Built-in Unique PoE Functions for Surveillance Management
As a managed PoE Switch for surveillance network, the GS-5220-48P4X series features
four special PoE management functions:
■PDalivecheck
■Scheduledpowerrecycling
■PoEschedule
■PoEusagemonitoring
Intelligent Powered Device Alive Check
The GS-5220-48P4X series can be configured to monitor connected PD status in real
time via ping action. Once the PD stops working and has no response, the GS-5220-
48P4X series will resume the PoE port power and bring the PD back to work. It will
greatly enhance the network reliability through the PoE port resetting the PD’s power
source and reduce administrator management burden.