GS-5220-Series (V4) User Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.2.1 Management
- 4.2.1.1 System Information
- 4.2.1.2 IP Configuration
- 4.2.1.3 IP Status
- 4.2.1.4 Users Configuration
- 4.2.1.5 Privilege Levels
- 4.2.1.6 NTP Configuration
- 4.2.1.6.1 System Time Correction Manually
- 4.2.1.7 Time Configuration
- 4.2.1.8 UPnP
- 4.2.1.9 DHCP Relay
- 4.2.1.10 DHCP Relay Statistics
- 4.2.1.11 CPU Load
- 4.2.1.12 System Log
- 4.2.1.13 Detailed Log
- 4.2.1.14 Remote Syslog
- 4.2.1.15 SMTP Configuration
- 4.2.2 Simple Network Management Protocol
- 4.2.3 RMON
- 4.2.4 DHCP server
- 4.2.1 Management
- 4.3 Switching
- 4.3.1 Port Management
- 4.3.2 Link Aggregation
- 4.3.3 VLAN
- 4.3.3.1 VLAN Overview
- 4.3.3.2 IEEE 802.1Q VLAN
- 4.3.3.3 VLAN Port Configuration
- 4.3.3.4 VLAN Membership Status
- 4.3.3.5 VLAN Port Status
- 4.3.3.6 Private VLAN
- 4.3.3.7 Port Isolation
- 4.3.3.8 VLAN setting example:
- 4.3.3.8.1 Two Separate 802.1Q VLANs
- 4.3.3.8.2 VLAN Trunking between two 802.1Q aware switches
- 4.3.3.8.3 Port Isolate
- 4.3.3.9 MAC-based VLAN
- 4.3.3.10 Protocol-based VLAN
- 4.3.3.11 Protocol-based VLAN Membership
- 4.3.4 Spanning Tree Protocol
- 4.3.5 IGMP Snooping
- 4.3.6 MLD Snooping
- 4.3.7 MVR (Multicast VLAN Registration)
- 4.3.8 LLDP
- 4.3.9 MAC Address Table
- 4.3.10 Loop Protection
- 4.3.11 UDLD
- 4.3.12 GVRP
- 4.3.13 Link OAM
- 4.4 Routing
- 4.5 Quality of Service
- 4.6 Security
- 4.7 Power over Ethernet
- 4.8 Ring
- 4.9 ONVIF
- 4.10 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A: Networking Connection
- APPENDIX B : GLOSSARY
User’s Manual of GS-5220 PoE Series Managed Switch
47
■ Per 1G/10G SFP+ Interfaces (Port-11 to Port-12)
LED Color Function
1G
LNK/ACT
Green
Lights
Indicating the port is running at 1Gbps speed and successfully established.
Blinks
Indicating that the switch is actively sending or receiving data over that port.
10G
LNK/ACT
Amber
Lights
Indicating the port is running at 10Gbps speed and successfully established.
Blinks
Indicating that the switch is actively sending or receiving data over that port.
GS-5220-8P2T2X Front Panel
Figure 2-1-24: Front Panel of GS-5220-8P2T2X
■ System/Alert
LED Color Function
Fan Alert Red Lights to indicate that the fan is not working
Ring Green
Lights to indicate the Ring function is working.
Off
to indicate the Ring function is not working.
SYS Green
Lights to indicate the system is working.
Off to indicate the system is booting.
PWR Green
Lights to indicate the Switch has power.
■ PoE 10/100/1000BASE-T Interfaces (Port-1 to Port-8)
LED Color Function
1000
LNK/ACT
Green
Lights: To indicate the link through that port is successfully established at 1000Mbps.
Blinks: To indicate that the switch is actively sending or receiving data over that port.
10/100
LNK/ACT
Amber
Lights
: To indicate the link through that port is successfully established at 10/100Mbps.
Blinks: To indicate that the switch is actively sending or receiving data over that port.
PoE In-Use Amber
Lights: To indicate the port is providing DC in-line power.
Off: To indicate the connected device is not a PoE Powered Device (PD)
■ 10/100/1000BASE-T Interfaces (Port-9 to Port-10)
LED Color Function
1000
LNK/ACT
Green
Lights: To indicate the link through that port is successfully established at 1000Mbps.
Blinks: To indicate that the switch is actively sending or receiving data over that port.
10/100
LNK/ACT
Amber
Lights
: To indicate the link through that port is successfully established at 10/100Mbps.
Blinks: To indicate that the switch is actively sending or receiving data over that port.