GS-5220-Series (V4) User Manual

User’s Manual of GS-5220 PoE Series Managed Switch
306
• Certificate Upload
Upload a certificate PEM file into the switch. The file should contain the certificate
and private key together. If you have two separated files for saving certificate and
private key. Use the Linux cat command to combine them into a single PEM file.
For example, cat my.cert my.key > my.pem
Notice that the RSA certificate is recommended since most of the new version of
browsers has removed support for DSA in certificate, e.g. Firefox v37 and
Chrome v39.
Possible methods are:
Web Browser: Upload a certificate via Web browser.
URL: Upload a certificate via URL, the supported protocols
are HTTP, HTTPS, TFTP and FTP. The URL format is
<protocol>://[<username>[:<password>]@]<
host>[:<port>][/<path>]/<file_name>. For example,
tftp://10.10.10.10/new_image_path/new_image.dat,
http://username:password@10.10.10.10:80/new_image_path/new_image.dat. A
valid file name is a text string drawn from alphabet (A-Za-z), digits (0-9), dot (.),
hyphen (-), under score(_). The maximum length is 63 and hyphen must not be
first character. The file name content that only contains '.' is not allowed.
• Certificate Status
Display the current status of certificate on the switch.
Possible statuses are:
Switch secure HTTP certificate is presented.
Switch secure HTTP certificate is not presented.
Switch secure HTTP certificate is generating ...
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
: Click to refresh the page. Any changes made locally will be undone.