GS-5220-48P4X(V3) Datasheet

3
GS-5220-48P4X Series
– Built-in RADIUS client to cooperate with the RADIUS servers
– TACACS+ login users access authentication
– RADIUS/TACACS+ users access authentication
• Access Control List
– IP-based Access Control List (ACL)
– MAC-based Access Control List
• Source MAC/IP address binding
• DHCPSnoopingtolteruntrustedDHCPmessages
• Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
• IPSourceGuardpreventsIPspoong attacks
• IPaddressaccessmanagementtopreventunauthorized
intruder
Management
• IPv4 and IPv6 dual stack management
• Switch Management Interfaces
– Console/Telnet Command Line Interface
– Web switch management
– SNMP v1, v2c, and v3 switch management
– SSH, TLS, SSL and SNMP v3 secure access
• SNMP Management
– Four RMON groups (history, statistics, alarms and events)
– SNMPtrapforinterfaceLinkUpandLinkDownnotication
• IPv6 IP address/NTP/DNS management
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System Maintenance
– Firmware upload/download via HTTP/TFTP
– Reset button for system reboot or reset to factory default
– Dual images
• DHCP Relay and DHCP Option 82
• DHCP Server
• User Privilege levels control
• NTP (Network Time Protocol)
• Network Diagnostic
– ICMPv6/ICMPv4 remote ping
– Cable diagnostic technology provides the mechanism to detect
and report potential cabling issues
• SMTP/Syslog remote alarm
• System Log
• PLANET Smart Discovery Utility for deployment management
• Smart fan with speed control
Redundant Power System (GS-5220-48P4XR
and GS-5220-48PL4XR)
• Redundant 100~240V AC/36-60V DC dual power
• Active-active redundant power failure protection
• Backup of catastrophic power failure on one supply
• Fault tolerance and resilience
Convenient and Smart ONVIF Devices with Detection Feature
PLANET has newly developed an awesome feature -- ONVIF Support -- which is
specifically designed for co-operating with Video IP Surveillances. From the GS-
5220-48P4X series’ GUI, clients just need one click to search and show all of
the ONVIF devices via network application. In addition, clients can upload floor
images to switch and allows for deployment location of surveillance devices for
easier inspection and planning. Moreover, clients can get real-time surveillance’s
informationandonline/ofinestatus,andalsoallowsPoErebootcontrolfromGUI.
Centralized Power Management for Gigabit Ethernet PoE Networking
TofullltheneedsofhigherpowerrequiredPoEnetworkapplicationswithGigabit
speed transmission, the GS-5220-48P4X series features IEEE 802.3at PoE+ that
combines up to 36 watts of power output and data per port over one Cat5E/6
Ethernet cable. It is designed specifically to meet the demand of higher power
consuming network PD (powered device) such as IR, PTZ, speed dome cameras
or even box-type IP camera with a built-in fan and heater. Compliant with both
802.3at and 802.3af PoE, it allows more flexibility in power requirement for a
variety of PDs.
Built-in Unique PoE Functions for Surveillance Management
As a managed PoE Switch for surveillance network, the GS-5220-48P4X series
features four special PoE management functions:
■PDalivecheck
■Scheduledpowerrecycling
■PoEschedule
■PoEusagemonitoring
Intelligent Powered Device Alive Check
The GS-5220-48P4X series can be configured to monitor connected PD status in
real time via ping action. Once the PD stops working and has no response, the
GS-5220-48P4X series will resume the PoE port power and bring the PD back to
work. It will greatly enhance the network reliability through the PoE port resetting
the PD’s power source and reduce administrator management burden.
PT PoE Camera
Ping Request
Ping Request
Check alive status for 3 times
Restart PoE device if without response
Ping Echo
No Response......
PD Alive!!
Step 1
Step 3
Step 2
Step 4
ON
PoE
ON
ON
PoE
OFF
PD Status
Good!!
Alarm Notification