Datasheet

2
GS-5220-24UP4X(R)
GS-5220-24UPL4X(R)
• Routing interface provides per VLAN routing mode
• IP interfaces (Max. 128 VLAN interfaces)
• Routing table (Max. 128 routing entries)
Layer 2 Features
• High performance of Store-and-Forward architecture and
runt/CRClteringeliminateserroneouspacketstooptimize
the network bandwidth
• Storm Control support
– Broadcast/Multicast/Unknown unicast
• Supports VLAN
– IEEE 802.1Q tagged VLAN
– Up to 255 VLANs groups, out of 4094 VLAN IDs
– Supports provider bridging (VLAN Q-in-Q, IEEE
802.1ad)
– Private VLAN Edge (PVE)
– Protocol-based VLAN
– MAC-based VLAN
– Voice VLAN
– GVRP (GARP VLAN Registration Protocol)
• Supports Spanning Tree Protocol
– IEEE 802.1D Spanning Tree Protocol
– IEEE 802.1w Rapid Spanning Tree Protocol
– IEEE 802.1s Multiple Spanning Tree Protocol, spanning
tree by VLAN
– BPDU Guard
• Supports LinkAggregation
– 802.3ad Link Aggregation Control Protocol (LACP)
– Cisco ether-channel (static trunk)
– Maximum 14 trunk groups, up to 8 ports per trunk group
– Up to 40Gbps bandwidth (duplex mode)
• Provides port mirror (many-to-1)
• Portmirroringtomonitortheincomingoroutgoingtrafcon
a particular port
• Loop protection to avoid broadcast loops
• Supports ERPS (Ethernet Ring Protection Switching)
• Compatible with Cisco uni-directional link detection(UDLD)
that monitors a link between two switches and blocks the
ports on both ends of the link if the link fails at any point
between the two devices
• Link Layer Discovery Protocol (LLDP)
802.3bt PoE++ and Advanced PoE Power Output Mode Management
To meet the demand of various powered devices consuming stable PoE power, the
GS-5220 PoE++ Switch series provides six different PoE power output modes for
selection.
■95W UPoE/PoH Power Output Mode
■90W 802.3bt PoE++ Power Output Mode
■60W 802.3bt PoE++ Power Output Mode
■60W Force Power Output Mode
■30W End-span PoE Power Output Mode
■30W Mid-span PoE Power Output Mode
Door
Phone
Thin
Client
IP Camera
POS
System
Digital
Signage
Health
Care
IP Phone
11ac
Wi-Fi AP
PTZ
Camera
802.3at
30W
60-95W
802.3bt
802.3af
15W
Lighting
Built-in Unique PoE Functions for Powered Devices Management
Being the managed PoE switches for surveillance, wireless and VoIP networks, the
GS-5220 PoE++ Series features the following special PoE management functions:
■
PD alive check
■
Scheduled power recycling
■
PoE schedule
■
PoE usage monitoring
Device
IP Camera IP Camera IP Camera NVR
Switch
GS-5220 802.3bt PoE
++
Series
of ONVIF
IP Camera Monitoring
Convenient and Smart ONVIF Devices with Detection Feature
PLANET has newly developed an awesome feature -- ONVIF Support -- which is
specifically designed for co-operating with Video IP Surveillances. From the GS-
5220 PoE++ Series GUI, clients just need one click to search and show all of the
ONVIFdevicesvianetworkapplication.Inaddition,clientscanuploadoorimages
to the switch series, making the deployments of surveillance and other devices
easy for planning and inspection purposes. Moreover, clients can get real-time
surveillance’s information and online/offline status. They allow PoE reboot control
from the GUI.