Datasheet

GS-5220-24UP(L)4XV(R)
4
Scheduled Power Recycling
The GS-5220-24UP4XV(R) and GS-5220-24UPL4XV(R) allow each of the connected PoE IP cameras or PoE wireless access points to reboot at a specied
time each week. Therefore, they will reduce the chance of IP camera or AP crash resulting from buffer overow.
PoE Schedule for Energy Saving
Under the trend of energy saving worldwide and contributing to environmental protection, the GS-5220-24UP4XV and GS-5220-24UP4XVR can effectively
control the power supply besides their capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding
for each PoE port during specied time intervals and it is a powerful function to help SMBs or enterprises save power and money. It also increases security
by powering off PDs that should not be in use during non-business hours.
S M T W T F S
Automatically Reboot
Every Friday 23:00
PoE PT Camera
ON ON
PoE
OFF
CPU/Buffer
Load 85%
CPU/Buffer
Load 10%
Power
On
Power
On
Power
On
Power
On
6 Watts 6 Watts 12 Watts 12 Watts
PoE
PoE PoE
PoE
Power
Off
Power
Off
Power
Off
Power
On
6 Watts 6 Watts 12 Watts 12 Watts
PoE
PoE PoE
PoE
PoE
1000Base-T UTP with PoE
Total consumption of 36 watts/hr
5PM8AM
5PM 8AM
Save 24 watts/hr during off-business hours
Total Saved = 10800 Watts/month
PoE Usage Monitoring
Via the power usage chart in the web management interface, the GS-5220-24UP4XV(R) and GS-5220-24UPL4XV(R) enable the administrator to monitor the
status of the power usage of the connected PDs in real time. Thus, it greatly enhances the management efciency of the facilities.
Cost-effective 10Gbps Uplink Capacity
10G Ethernet is a big leap in the evolution of Ethernet. The four 10G SFP+ slots of the GS-5220-24UP4XV(R) and GS-5220-24UPL4XV(R) support dual-
speed 10GBASE-SR/LR or 1000BASE-SX/LX, meaning the administrator now can flexibly choose the suitable SFP/SFP+ transceiver according to the
transmission distance or the transmission speed required to extend the network efficiently. They greatly support SMB network to achieve the maximum
performance of 10Gbps in a cost-effective way because the 10GbE interface usually could be available in Layer 3 Switch but Layer 3 Switch could be too
expensive to SMBs.
Redundant AC/DC Power Supply to Ensure Continuous Operation
The GS-5220-24UP4XVR and GS-5220-24UPL4XVR are particularly equipped with one 100~240V AC power supply unit and one 36~60V DC power supply
unit to provide an enhanced reliable and scalable redundant power supply. The continuous power system is specifically designed to fulfill the demands of
high-tech facilities requiring the highest power integrity. With the 36~60V DC power supply, the GS-5220-24UP4XVR and GS-5220-24UPL4XVR are able to
act as a telecom-level device that can be located in the electronic room.
Ground 100~240V AC Power
36~60V DC Power