Datasheet

GS-5220-24UP(L)4XV(R)
3
75 Watts of Power over 4-pair UTP
The GS-5220-24UP4XV(R) and GS-5220-24UPL4XV(R) ultra PoE solutions adopt the
IEEE 802.3at/af standard. Instead of delivering power over 2-pair twisted UTP – be it
end-span (Pins 1,2,3 and 6) or mid-span (Pins 4,5,7 and 8), they provide the capability
to source up to 75 watts of power by using all the four pairs of standard Cat.5e/6
Ethernet cabling. In the new 4-pair system, two PSE controllers will be used to power
both the data pairs and the spare pairs. It can offer more PoE applications, such as:
■ PoE PTZ speed dome
■ Any network device that needs higher PoE power to work normally
■ Thin-client
■ AIO (All-in-One) touch PC
■ Remote digital signage display
MAC address to IP address binding
• IP Source Guard prevents IP spoong attacks
• IP address access management to prevent unauthorized
intruder
Management
• IPv4 and IPv6 dual stack management
• Switch Management Interfaces
– Console/Telnet Command Line Interface
– Web switch management
– SNMP v1, v2c, and v3 switch management
– SSH/SSL secure access
– 2.4-inch color LCD touch screen
• IPv6 IP address/NTP/DNS management
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System Maintenance
– Firmware upload/download via HTTP/TFTP
– Reset button for system reboot or reset to factory default
– Dual images
• DHCP Relay
• DHCP Option 82
• User Privilege levels control
• NTP (Network Time Protocol)
• Link Layer Discovery Protocol (LLDP) and LLDP-MED
• Network Diagnostic
– ICMPv6/ICMPv4 remote ping
– Cable diagnostic technology provides the mechanism to
detect and report potential cabling issues
• SMTP/Syslog remote alarm
• Four RMON groups (history, statistics, alarms and events)
• SNMP trap for interface Link Up and Link Down notication
• System Log
• PLANET Smart Discovery Utility for deployment management
• Smart fan with speed control
Redundant Power System
(GS-5220-24UP(L)4XVR)
• Redundant 100~240V AC/36-60V DC dual power
• Active-active redundant power failure protection
• Backup of catastrophic power failure on one supply
• Fault tolerance and resilience
Wireless
AP/Router
PTZ
Camera
Wireless
AP/CPE
IP Phone
Door
Phone
Thin
Client
IP Camera
Video
Phone
POS
System
Laptop
Digital
Signage
Built-in Unique PoE Functions for Powered Devices Management
Being the managed PoE switches for surveillance, wireless and VoIP networks, the
GS-5220-24UP4XV(R) and GS-5220-24UPL4XV(R) feature the following special PoE
management functions:
■ PD alive check
■ Scheduled power recycling
■ PoE schedule
■ PoE usage monitoring
Intelligent Powered Device Alive Check
The GS-5220-24UP4XV(R) and GS-5220-24UPL4XV(R) can be configured to monitor
connected PD (powered device) status in real time via ping action. Once the PD stops
working and responding, the GS-5220-24UP4XV(R) and GS-5220-24UPL4XV(R) will
resume the PoE port power and bring the PD back to work. They will greatly enhance
the network reliability through the PoE port resetting the PD’s power source and reducing
administrator management burden.
PT PoE Camera
Ping Request
Ping Request
Check alive status for 3 times
Restart PoE device if without response
Ping Echo
No Response......
PD Alive!!
Step 1
Step 3
Step 2
Step 4
ON
PoE
ON
ON
PoE
OFF
PD Status
Good!!
Alarm Notification