GS-5220-Series User Manual

User’s Manual of GS-5220 Ultra PoE & PoE+ Series
79
4.2.4 Users Configuration
This page provides an overview of the current users. Currently the only way to login as another user on the web server is to
close and reopen the browser. After setup is completed, press the “Apply” button to take effect. Please login web interface with
new user name and password; the screen in Figure 4-2-4 appears.
Figure 4-2-4: Users Configuration Page Screenshot
The page includes the following fields:
Object Description
• User Name
The name identifying the user. This is also a link to Add/Edit User.
• Privilege Level
The privilege level of the user.
The allowed range is 1 to 15. If the privilege level value is 15, it can access all
groups, i.e. that is granted the full control of the device. But other values need to
refer to each group privilege level. User's privilege should be the same or greater
than the group privilege level to have the access to that group.
By default setting, most groups privilege level 5 has the read-only access and
privilege level 10 has the read-write access. And the system maintenance
(software upload, factory defaults and etc.) needs user privilege level 15.
Generally, the privilege level 15 can be used for an administrator account,
privilege level 10 for a standard user account and privilege level 5 for a guest
account.
Buttons
: Click to add a new user.
Add / Edit User
This page configures a user – add, edit or delete user.