Datasheet

GS-5220-24P4X/GS-5220-24PL4XR
1
L3 24-Port 10/100/1000T 802.3at PoE+ 4-Port 10G SFP+
Managed Switch
10G Ethernet Switch Solution for SMBs
PLANET GS-5220 24-port 802.3at PoE+ Layer 3 Managed Switch supports both
IPv4 and IPv6 protocols, and hardware Layer 3 static routing capability. It
complies with IEEE 802.3at Power over Ethernet Plus (PoE+), and is equipped
with 24 10/100/1000BASE-T Gigabit Ethernet ports, 4 shared Gigabit SFP ports
and 4 10G SFP+ uplink ports. Its 24 Gigabit Ethernet ports are integrated with
802.3at PoE+ injector function.
The GS-5220 can handle extremely large amounts of data in a secure topology
linking to deployed Power over Ethernet networks, data center/service provider
backbone or high capacity servers. It can work with a 10Gbps SFP+ server adapter
to help SMBs build the 10Gbps Ethernet network providing 10Gbps NAS (Network
Attached Storage) or heavy transmission of video streaming service.
Physical Port
• 24 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with
IEEE 802.3at PoE+ injector function
• 4 100/1000BASE-X mini-GBIC/SFP combo interfaces with
Port-21 to Port-24
• 4 10GBASE-SR/LR SFP+ ports, compatible with
1000BASE-SX/LX/BX SFP
• 1 RJ45 console interface for basic management and setup
Power over Ethernet
• Complies with IEEE 802.3at PoE+/end-span PSE
• Up to 24 IEEE 802.3af/802.3at devices powered
• Supports PoE power up to 36 watts for each PoE port
• Auto detects powered device (PD)
• Circuit protection prevents power interference between
ports
• Remote power feeding up to 100M
• PoE Management
– Total PoE power budget control
– Per port PoE function enable/disable
– PoE port power feeding priority
– Per PoE port power limit
– PDclassicationdetection
• Intelligent PoE features
– Temperature threshold control
– PD alive check
– PoE schedule
– PD scheduled power recycling
Layer 2 Features
• Prevents packet loss with back pressure (half-duplex) and
IEEE802.3xpauseframeowcontrol(full-duplex)
• High performance of Store-and-Forward architecture and
runt/CRClteringeliminateserroneouspacketstooptimize
the network bandwidth
• Storm Control support
– Broadcast/Multicast/Unknown unicast
• Supports VLAN
– IEEE 802.1Q tagged VLAN
– Up to 4K VLANs groups, out of 4095 VLAN IDs
– Supports provider bridging (VLAN Q-in-Q, IEEE
802.1ad)
– Private VLAN Edge (PVE)
– Protocol-based VLAN
24 x Gigabit 802.3at PoE
+
RJ45
RJ45 Type Console
4 x Shared 100/1000BASE-X SFP
4 x 1G/10G SFP+
Layer 3 Routing Support
The GS-5220 enables the administrator to conveniently boost network efficiency
by configuring Layer 3 IPv4/IPv6 VLAN static routing manually, and the OSPFv2
(Open Shortest Path First) settings automatically. The OSPF is an interior
dynamic routing protocol for autonomous system based on link state. The
protocol creates a database for link state by exchanging link states among Layer
3 switches, and then uses the Shortest Path First algorithm to generate a route
table based on that database.