Datasheet

GS-5220-20T4C4X
GS-5220-20T4C4XR
2
Redundant AC/DC Power Supply to Ensure Continuous Operation
The GS-5220-20T4C4XR is particularly equipped with one 100~240V AC power supply
unit and one 36~60V DC power supply unit to provide an enhanced reliable and
scalableredundantpowersupply.Thecontinuouspowersystemisspecicallydesigned
tofulllthedemandsofhigh-techfacilitiesrequiringthehighestpowerintegrity.Withthe
36~60V DC power supply, the GS-5220-20T4C4XR is able to act as a telecom-level
device that can be located in the electronic room.
Solution for IPv6 Networking
By supporting IPv6/IPv4 dual stack and plenty of management functions with easy and
friendly-user interfaces, the GS-5220 series is the best choice for IP surveillance, VoIP
and wireless service providers to deploy the IPv6 network. It also helps the SMBs to
step in the IPv6 era with the lowest investment but not necessary to replace the network
facilities while the ISPs construct the IPv6 FTTx edge network.
IPv4 and IPv6 VLAN Routing for Secure and Flexible Management
To help customers stay on top of their businesses, the GS-5220 switch series not only
provides ultra high transmission performance and excellent layer 2 technologies, but also
offers IPv4/IPv6 VLAN routing feature which allows to crossover different VLANs and
different IP addresses for the purpose of having a highly-secure, flexible management
and simpler networking application.
Robust Layer2 Features
The GS-5220 series can be programmed for advanced switch management function,
such as dynamic port link aggregation, Q-in-Q VLAN, Multiple Spanning Tree Protocol
(MSTP), Layer 2/4 QoS, bandwidth control and IGMP/MLD snooping. The SGS-5220
series allows the operation of a high-speed trunk combining multiple ports. It consists of
a maximum of 14 trunk groups with 8 ports for each group, and supports connection fail-
over as well.
Layer 3 Features
• IP Interfaces Max. 8 VLAN interfaces
• Routing Table Max. 32 routing entries
• Routing Protocols IPv4/IPv6 software static routing
Quality of Service
• Ingress Shaper and Egress Rate Limit per port bandwidth
control
• 8 priority queues on all switch ports
• Trafcclassication
–
IEEE 802.1p CoS
–
TOS/DSCP/IP Precedence of IPv4/IPv6 packets
–
IP TCP/UDP port number
–
Typical network application
• StrictpriorityandWeightedRoundRobin(WRR)CoS
policies
• Supports QoS and In/Out bandwidth control on each port
• Trafc-policingpoliciesontheswitchport
• DSCP remarking
Multicast
• Supports IGMP snooping v1, v2 and v3
• Supports MLD snooping v1 and v2
• Querier mode support
• IGMPsnoopingportltering
• MLDsnoopingportltering
• Multicast VLAN Registration (MVR) support
Security
• Authentication
–
IEEE 802.1x port-based/MAC-based network access
authentication
–
Built-in RADIUS client to cooperate with the RADIUS
servers
–
TACACS+ login users access authentication
–
RADIUS/TACACS+ users access authentication
• Access Control List
–
IP-based Access Control List (ACL)
–
MAC-based Access Control List
• Source MAC/IP address binding
• DHCPSnoopingtolteruntrustedDHCPmessages
• Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
• IPSourceGuardpreventsIPspoongattacks
100~240V AC Power
36~60V DC Power
Ground
IPv4 Network
IPv6 Network
Application
IPv6
Stack
IPv4
Stack
Transport Layer
TELNET WEB
SSHSNMP
ICMPSSL
DHCPNTP
GS-5220-20T4C4X
IPv6 Management HostIPv4 Management Host
LACPMSTP
Q-in-Q LLDPQoS
MLD
IGMP