Datasheet
GS-5220-16T4S2X
GS-5220-16T4S2XR
1
IPv6 Routing and 10G Ethernet Switch Solutions for SMBs
PLANET GS-5220-16T4S2X and GS-5220-16T4S2XR Layer 2+ Managed Gigabit
Switches support both IPv4 and IPv6 protocols and hardware Layer 3 static routing
capability, and provide 16 10/100/1000Mbps Gigabit Ethernet ports, 4 additional
Gigabit SFP slots and 2 10G SFP+ uplink slots. The GS-5220-16T4S2X series can
handle extremely large amounts of data in a secure topology linking to a data center/
service provider backbone or high capacity servers. They can work with a 10Gbps SFP+
server adapter to help SMBs build the 10Gbps Ethernet network providing 10Gbps NAS
(Network Attached Storage) or heavy transmission of video streaming service at an
affordable price.
Cost-effective 10Gbps Uplink Capacity
10G Ethernet is a big leap in the evolution of Ethernet. The two 10G SFP+ slots of the
GS-5220-16T4S2X series support dual-speed 10GBASE-SR/LR or 1000BASE-SX/LX,
meaning the administrator now can flexibly choose the suitable SFP/SFP+ transceiver
according to the transmission distance or the transmission speed required to extend
the network efficiently. They greatly support SMB network to achieve the maximum
performance of 10Gbps in a cost-effective way because the 10GbE interface usually
could be available in Layer 3 Switch but Layer 3 Switch could be too expensive to
SMBs.
L2+ 16-Port 10/100/1000T + 4-Port 100/1000X SFP +
2-Port 10G SFP+ Managed Switch
Physical Port
• 16-port 10/100/1000BASE-T RJ45 copper
• 4 100/1000BASE-X mini-GBIC/SFP slots
• 2 10GBASE-SR/LR SFP+ slots, compatible with
1000BASE-SX/LX/BX SFP
• RJ45 console interface for basic management and setup
Layer 2 Features
• Prevents packet loss with back pressure (half-duplex) and
IEEE802.3xpauseframeowcontrol(full-duplex)
• High performance of Store-and-Forward architecture and
runt/CRClteringeliminateserroneouspacketstooptimize
the network bandwidth
• Storm Control support
–
Broadcast/Multicast/Unknown unicast
• Supports VLAN
–
IEEE 802.1Q tagged VLAN
–
Up to 255 VLANs groups, out of 4094 VLAN IDs
–
Supports provider bridging (VLAN Q-in-Q, IEEE
802.1ad)
–
Private VLAN Edge (PVE)
–
Protocol-based VLAN
–
MAC-based VLAN
–
Voice VLAN
• Supports Spanning Tree Protocol
–
IEEE 802.1D Spanning Tree Protocol
–
IEEE 802.1w Rapid Spanning Tree Protocol
–
IEEE 802.1s Multiple Spanning Tree Protocol, spanning
tree by VLAN
–
BPDU Guard
• Supports Link Aggregation
–
802.3ad Link Aggregation Control Protocol (LACP)
–
Cisco ether-channel (static trunk)
–
Maximum 12 trunk groups, up to 10 ports per trunk
group
–
Up to 20Gbps bandwidth (full duplex mode)
• Provides port mirror (many-to-1)
• Portmirroringtomonitortheincomingoroutgoingtrafcon
a particular port
• Loop protection to avoid broadcast loops
Layer 3 Features
• IP Interfaces Max. 8 VLAN interfaces
• Routing Table Max. 32 routing entries
• Routing Protocols IPv4/IPv6 software static routing
4 x 100/1000BASE-X SFP
RJ45 Type Console 16 x 10/100/1000BASE-T 2 x 1G/10G SFP+