User Guide

Table Of Contents
Command Guide of GS-5220-16S8C and GS-5220-16S8CR
Switch# configure terminal
Switch (config)# erps 3 sub port0 interface GigabitEthernet 1/5 port1 interface
GigabitEthernet 1/6
Example 2:
To create a profile 2 and configure the Sub ERPS interface port 0(GigabitEthernet 1/3), port 1(GigabitEthernet 1/4) with
interconnected mode and Major RIng group 1 and virtual-channel
Switch# configure terminal
Switch (config)# erps 1 sub port0 interface GigabitEthernet 1/3 interconnect 1
virtual-channel
4.2.48 erps <1-64> topology-change propagate
Command:
erps <1-64> topology-change propagate
<1-64> ERPS group number
topology-change Topology Change
propagate Propagate
Default:
N/A
Usage Guide:
To configure topology change notification (TCN) propagation for the specific profile.
Example:
To configure topology change notification (TCN) propagation for the specific profile 1
Switch# configure terminal
Switch (config)# erps 1 topology-change propagate
4.2.49 erps <1-64> topology-change propagate
Command:
erps <1-64> version 1 | 2
<1-64> ERPS group number
version Version
-79
-