User Guide

Table Of Contents
Command Guide of GS-5220-16S8C and GS-5220-16S8CR
Baud : 115200
Data bits : 8
Parity : None
Stop bits : 1
Flow control : None
Figure 2-3 Hyper Terminal COM Port Configuration
You can change these settings, if desired, after you log on. This management method is often preferred because you can
remain connected and monitor the system during system reboots. Also, certain error messages are sent to the serial port,
regardless of the interface through which the associated action was initiated. A Macintosh or PC attachment can use any
terminal-emulation program for connecting to the terminal serial port. A workstation attachment under UNIX can use an
emulator such as TIP.
-23
-