User Guide

Command Guide of GS-5220-16S8C and GS-5220-16S8CR
Default:
None
Usage Guide:
To back to EXEC mode
Example:
To back to EXEC mode
Switch# configure terminal
Switch (config)# line vty 1
Switch (config-line)#end
Switch#
4.2.103.4 exec-banner
Command:
exec-banner
exec-banner Enable the display of the EXEC banner
Default:
Enabled
Usage Guide:
To enable the display of the EXEC banner
Example:
To enable the display of the EXEC banner
Switch# configure terminal
Switch (config)# line vty 1
Switch (config-line)# exec-banner
4.2.103.5 exec-timeout
Command:
exec-timeout <0-1440>
exec-timeout Set the EXEC timeout
<0-1440> Timeout in minutes
Default:
-223
-