User Guide

Command Guide of GS-5220-16S8C and GS-5220-16S8CR
<X:X:X:X::X> IPv6 unicast address (except link-local address) of next-hop
interface Select an interface to configure
vlan VLAN Interface
<vlan_id> VLAN identifier(s): VID
<FE80::X:X:X> IPv6 link-local address of next-hop
Default:
None
Usage Guide:
To configure static route for IPv6
Example 1:
To configure static route as below table for IPv6.
Switch# configure terminal
Switch (config)# ipv6 route 2001::7788/128 2002::1
Example 2:
To configure static route as below table for IPv6.
Switch# configure terminal
Switch (config)# ipv6 route 2001::7788/128 interface vlan 1 fe80::1
4.2.102 lacp system-priority
Command:
lacp system-priority <1-65535>
lacp LACP settings
system-priority System priority
<1-65535> Priority value, lower means higher priority
Default:
32768
Usage Guide:
To configure LACP system-priority.
-220
-