User Guide

Table Of Contents
Command Guide of GS-5220-16S8C and GS-5220-16S8CR
Enabled
Usage Guide:
To enable Ingress-filtering with Hybrid VLAN mode for specific interface
Example:
To enable Ingress-filtering with Hybrid VLAN mode for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # switchport hybrid ingress-filtering
4.2.65.129 switchport hybrid native vlan
Command:
switchport hybrid native vlan <vlan_id>
switchport Switching mode characteristics
hybrid Change PVID for hybrid port
native Set native VLAN
vlan Set native VLAN when interface is in hybrid mode
<vlan_id> VLAN ID of the native VLAN when this port is in hybrid mode
Default:
1
Usage Guide:
To configure PVID in Hybrid VLAN mode for specific interface
Example:
To enable PVID (5) in Hybrid VLAN mode for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # switchport hybrid native vlan 5
4.2.65.130 switchport hybrid port-type
Command:
switchport hybrid port-type c-port | s-custom-port | s-port | unaware
switchport Switching mode characteristics
hybrid Change PVID for hybrid port
-164
-