User Guide

Table Of Contents
Command Guide of GS-5220-16S8C and GS-5220-16S8CR
evc l2cp forward <L2cpPeerList : 0~31>
evc Ethernet Virtual Connections
l2cp Setup L2CP forwarding
peer Redirect L2CP frames to local protocol entity
<L2cpPeerList : 0~31> Select BPDU addresses (0-15) and GARP addresses (16-31)
Default:
N/A
Usage Guide:
To configure policy ID of L2CP peer
Example:
To configure policy 1 of L2CP peer for GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # evc l2cp peer 1
4.2.65.23 evc update dei
Command:
evc update dei colored | fixed
evc Ethernet Virtual Connections
update Update existing entry
dei Setup DEI mode
colored Allow policer to set DEI
fixed Use classified DEI
Default:
Fixed
Usage Guide:
To update EVC DEI mode
Example:
To update EVC DEI mode (Colored) for GigabitEthernet X/X.
Switch# configure terminal
-106
-