User Guide

Table Of Contents
Command Guide of GS-5220-16S8C and GS-5220-16S8CR
To back to EXEC mode
Example:
To back to EXEC mode
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # end
Switch#
4.2.65.19 evc dei
Command:
evc dei colored | fixed
evc Ethernet Virtual Connections
dei Setup DEI mode
colored Allow policer to set DEI
fixed Use classified DEI
Default:
Fixed
Usage Guide:
To configure EVC DEI mode
Example:
To configure EVC DEI mode (Colored) for GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # evc dei colored
4.2.65.20 evc l2cp discard(GG)
Command:
evc l2cp discard <L2cpDiscardList : 0~31>
evc Ethernet Virtual Connections
l2cp Setup L2CP forwarding
discard Discard L2CP frames
-104
-