Datasheet
GS-5220-16S8C/R
2
Redundant AC / DC Power Supply to Ensure Continuous Operation
The GS-5220-16S8CR is particularly equipped with one 100~240V AC power supply unit
and one 36~60V DC power supply unit to provide an enhanced reliable and scalable
redundant power supply installation. The continuous power system is specifically
designedtofulllthedemandsofhightechfacilitiesrequiringthehighestpowerintegrity.
With the 36~60V DC power supply, the GS-5220-16S8CR is able to act as a telecom
level device that can be located in the electronic room.
Effective Alarm Alert for Better Protection
The GS-5220-16S8C and GS-5220-16S8CR support a Fault Alarm feature which can
alert the users when there is something wrong with the switches. With this ideal feature,
theuserswouldnothavetowastetimetondwheretheproblemis.Itwillhelptosave
time and human resource.
Solution for IPv6 Networking
Faced with the increasingly large number of IP cameras and wireless APs installed and
deployed in all kinds of applications, more and more network facilities start to support
the IPv6 protocol for the next-generation networking. By supporting both the IPv4
and IPv6, and numerous management functions with easy and friendly management
interfaces, the GS-5220-16S8C and GS-5220-16S8CR are the best choices for IP
surveillance and wireless service providers to connect with the IPv6 network.
• 8 priority queues on all switch ports
• Trafcclassication
–
IEEE 802.1p CoS
–
TOS / DSCP / IP Precedence of IPv4/IPv6 packets
–
IP TCP/UDP port number
–
Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS
policies
• Trafc-policingpoliciesontheswitchport
• DSCP remarking
Multicast
• Supports IGMP Snooping v1, v2 and v3
• Supports MLD Snooping v1 and v2
• Querier mode support
• IGMPSnoopingportltering
• MLDSnoopingportltering
• MVR (Multicast VLAN Registration)
Security
• IEEE 802.1X Port-based / MAC-based network access
authentication
• IEEE 802.1X Authentication with Guest VLAN
• Built-in RADIUS client to cooperate with the RADIUS
servers
• RADIUS / TACACS+ users access authentication
• IP-based Access Control List (ACL)
• MAC-based Access Control List (ACL)
• Source MAC / IP address binding
• DHCPSnoopingtolterdistrustedDHCPmessages
• Dynamic ARP Inspection discards ARP packets with
invalid MAC address to IP address binding
• IPSourceGuardpreventsIPspoongattacks
• IP address access management to prevent
unauthorizedintruder
Management
• Switch Management Interfaces
–
Console / Telnet Command Line Interface
–
Web switch management
–
SNMP v1, v2c, and v3 switch management
–
SSH / SSL secure access
• Four RMON groups (history, statistics, alarms and
events)
• IPv6 Address / NTP management
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• Firmware upload / download via HTTP / TFTP
• DHCP Relay and Option 82
• User Privilege levels control
• NTP (Network Time Protocol)
• Link Layer Discovery Protocol (LLDP)
• SFP-DDM (Digital Diagnostic Monitor)
• Cable Diagnostic technology provides the mechanism to
detect and report potential cabling issues for TP ports
• ICMPv6 / ICMPv4 Remote Ping
AC Power
Ground
AC/DC Power
Failure
RJ-45/Fiber Connection
Link Down
or
Fault Alarm Feature
System
Log
SNMP
TRAP
Mail
Digital Diagnostic Monitor (DDM)
Temperature
Voltage
V
2
0
6
4
8
10
12
Power Receiver
0
20−20
40−40
60−60
dBm
Power Transceiver
0
20−20
40−40
60−60
dBm
mA
10
0
30
20
40
50
60
Ammeter
°C
0
25
50
75
100