Datasheet

Data Sheet
1
GS-5220-16S8C/R
1
L2+ 24-Port 100/1000X SFP + 8-Port Shared TP
Managed Switch
Multi Port / Flexible Dual-speed Fiber Optic Connectivity for Long-reach
Distance Solution
PLANET’s latest Layer 2+ Managed Core Fiber Switches, GS-5220-16S8C and GS-
5220-16S8CR, provide high-density performance and support IPv4 and IPv6 hardware
Layer 3 static routing and 24 100/1000Base-X dual-speed SFP slots in a 1U case.
With these ideal features, they are able to cross over different VLANs and different IP
addresses for the purpose of having a highly-secured, flexible management and long-
reach networking application. As a fiber backbone switch, they can flexibly work with
suitable SFP transceivers to have a long connection of up to 120km via optic fiber
cabling. They are well suited for SMBs, campuses and enterprises for their backbone
and workgroup network applications by providing affordability, high performance, long
distance and stable transmission quality.
Intelligent SFP Diagnostic Mechanism
The GS-5220-16S8C and GS-5220-16S8CR SFP slots support dual-speed, 1000Base-
SX / LX or 100Base-FX fiber transceivers; the distance can be extended from 550
meters to 2 kilometers (multi-mode fiber) and up to 10/20/30/40/50/70/120 kilometers
(single-mode fiber or WDM fiber). They also support SFP-DDM (Digital Diagnostic
Monitor) function that greatly helps network administrator to easily monitor real-time
parameters of the SFP, such as optical output power, optical input power, temperature,
laser bias current, and transceiver supply voltage.
Physical Port
• 24 100/1000Base-X mini-GBIC/SFP slots
• 8-port 10/100/1000Base-T Gigabit Ethernet RJ-45, shared
with Port-1 to Port-8
• RJ-45 to RS-232 DB9 console interface for basic
management and setup
Layer 2 Features
• Prevents packet loss with back pressure (half-duplex) and
IEEE802.3xpauseframeowcontrol(full-duplex)
• High performance of Store-and-Forward architecture and
runt/CRClteringeliminateserroneouspacketstooptimize
the network bandwidth
• Storm Control support
Broadcast / Unicast / Unknown Unicast
• Supports VLAN
IEEE 802.1Q tagged VLAN
Up to 255 VLANs groups, out of 4095 VLAN IDs
Provider Bridging (VLAN Q-in-Q) support (IEEE
802.1ad)
Private VLAN Edge (PVE)
Protocol-based VLAN
MAC-based VLAN
IP Subnet-based VLAN
Voice VLAN
• Supports Spanning Tree Protocol
STP, IEEE 802.1D Spanning Tree Protocol
RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
MSTP, IEEE 802.1s Multiple Spanning Tree Protocol,
spanning tree by VLAN
BPDU Guard
• Supports Link Aggregation
802.3ad Link Aggregation Control Protocol (LACP)
Cisco ether-channel (Static Trunk)
Maximum 12 trunk groups, up to 8 ports per trunk group
Up to 16Gbps bandwidth (full duplex mode)
• Provides Port Mirror (many-to-1)
• PortMirroringtomonitortheincomingoroutgoingtrafcon
a particular port
• Loop protection to avoid broadcast loops
Layer 3 IP Routing Features
• Supports maximum 128 static routes and route
summarization
Quality of Service
• Ingress Shaper and Egress Rate Limit per port bandwidth
control
8 x Gigabit TP/SFP Combo Port 24 x 100/1000X SFP Port
Reset Button
RJ45 Type Console Port

Summary of content (7 pages)