Datasheet

GS-4210-8P2C
7
Specications
Product
GS-4210-8P2C
HardwareSpecications
Copper Ports 10 x 10/100/1000BASE-T RJ45 Auto-MDI/MDI-X ports
SFP Ports
2 x 100/1000BASE-X SFP interfaces
Supports 100/1000Mbps dual mode and DDM
PoE Injector Port 8 ports with 802.3at/af PoE injector function with Port-1 to Port-8
Console 1 x RS-232-to-RJ45 serial port (115200, 8, N, 1)
Reset Button
< 5 sec: System reboot
> 5 sec: Factory default
Dimensions (W x D x H) 280 x 180 x 44 mm, 1U height
Weight 1.7kg
Enclosure Metal
Power Requirements AC 100~240V, 50/60Hz, 4A, auto-sensing
Power Consumption/ Dissipation 154 watts (max.)/525BTU
ESD Protection
Contact Discharge 6KV DC
Air Discharge 8KV DC
Fan 1xedspeedFan
LED
System:
PWR (Green)
SYS (Green)
Per 10/100/1000T RJ45Ports Port (Port 1 to Port 10):
LNK (Green), ACT (Blinks)
Per PoE Port (Port 1 to Port 8):
PoE-in-use (Amber)
Per Gigabit SFP Port (Port 11 to Port 12):
LNK (Green), ACT (Blinks)
SwitchingSpecications
Switch Architecture Store-and-Forward
Switch Fabric 24Gbps/non-blocking
Switch Throughput@64Bytes 17.85Mpps
Address Table 8K entries
Shared Data Buffer 4.1 megabits
Flow Control
IEEE 802.3x pause frame for full duplex
Back pressure for half duplex
Jumbo Frame 10K bytes
Power over Ethernet
PoE Standard IEEE 802.3af/802.3at PoE / PSE
PoE Power Supply Type End-span
PoE Power Output Per Port 54V DC, 32 watts (max.)
Power Pin Assignment End-span: 1/2 (+), 3/6 (-)
PoE Power Budget 120 watts (max.)
Number of 802.3af PDs 7 units
Number of 802.3at PDs 4 units
PoE Management
PD Alive Check
Scheduled Power Recycling
PoE Schedule
PoE Usage Monitoring
PoE Extension
Layer 2 Functions
Port Mirroring
TX/RX/both
Many-to-1 monitor
Up to 4 sessions
VLAN
IEEE 802.1Q tagged-based VLAN
IEEE 802.1ad Q-in-Q tunneling
Voice VLAN
Protocol VLAN
Private VLAN (Protected port)
GVRP
Up to 256 VLAN groups, out of 4094 VLAN IDs
Link Aggregation
IEEE 802.3ad LACP/Static Trunk
Supports 2 trunk groups with 4 ports per trunk