(V2) Datasheet

GS-4210-48T4S
2
IPv6 / IPv4 Dual Stack
By supporting both IPv6 and IPv4 protocols, the GS-4210-48T4S helps the SMBs
to step in the IPv6 era with the lowest investment as network facilities do not need
to be fully replaced. Thus, the IPv4 network can be easily upgraded by ISPs to the
IPv6 FTTx edge network.
Robust Layer 2 Features
The GS-4210-48T4S can be programmed for advanced switch management
functions such as dynamic port link aggregation, 802.1Q VLAN and Q-in-Q VLAN,
Multiple Spanning Tree protocol (MSTP), Loop and BPDU Guard, and IGMP
Snooping. Via the aggregation of supporting ports, the GS-4210-48T4S allows the
operation of a high-speed trunk to combine with multiple ports such as a 16Gbps
fat pipe and supports fail-over as well.
Efficient Traffic Control
The GS-4210-48T4S is loaded with robust QoS features and powerful traffic
management to enhance services to business-class data, voice, and video
solutions. The functionality includes broadcast / multicast storm control, per port
bandwidth control, IP DSCP QoS priority and remarking. It guarantees the best
performance of VoIP and video stream transmission, and empowers the enterprises
to take full advantage of the limited network resources.
Enhanced and Secure Management
For efficient management, the GS-4210-48T4S is equipped with Web, Telnet and
SNMP management interfaces. With the built-in Web-based management interface,
the GS-4210-48T4S offers an easy-to-use, platform-independent management and
conguration facility. By supporting standard Simple Network Management Protocol
(SNMP), the switch can be managed via any standard management software. For
text-based management, the switch can be accessed via Telnet port. Moreover, the
GS-4210-48T4S offers secure remote management by supporting SSH and SSL
connections which encrypt the packet content at each session.
Powerful Security
PLANET GS-4210-48T4S offers comprehensive Layer 2 to Layer 4 Access
Control List (ACL) for enforcing security to the edge. It can be used to restrict
network access by denying packets based on source and destination IP address,
TCP/UDP ports or defined typical network applications. Its protection mechanism
also comprises 802.1X port-based authentication, which can be deployed
with RADIUS to ensure the port level security and block illegal users. With the
Protected Port function, communication between edge ports can be prevented
to guarantee user privacy. Port Security allows to limit the number of users on a
given port. The network administrators can now construct highly-secured corporate
networks with considerably less time and effort than before.
Multicast
• Supports IPv4 IGMP snooping v2 and v3
• Supports IPv6 MLD snooping v1, v2
• IGMP querier mode support
• IGMP snooping port ltering
• MLD snooping port ltering
Security
• Authentication
–
IEEE 802.1X port-based network access authentication
–
Built-in RADIUS client to co-operate with the RADIUS
servers
–
DHCP Option 82
–
RADIUS / TACACS+ authentication
• Access Control List
–
IPv4 / IPv6 IP-based ACL
–
IPv4 / IPv6 IP-based ACE
–
MAC-based ACL
–
MAC-based ACE
• MAC Security
–
Static MAC
–
MAC Filtering
• Port security for source MAC address entries ltering
• DHCP snooping to lter distrusted DHCP messages
• Dynamic ARP inspection discards ARP packets with invalid
MAC address to IP address binding
• IP source guard prevents IP spoong attacks
• DoS attack prevention
• SSH/SSL
Management
• IPv4 and IPv6 dual stack management
• Switch Management Interface
–
IPv4 / IPv6 Web switch management
–
Telnet Command Line Interface
–
SNMP v1, v2c and v3
–
HTTPs secure access
• Built-in Trivial File Transfer Protocol (TFTP) client
• User privilege levels control
• Static and DHCP for IP address assignment
MSTP
SNMP
IGMP
MAC Secuity
Storm Control
Bandwidth Control
LACP
L2 Web Smart L2 Web Smart