Datasheet

GS-4210-48T4S
6
Specications
Product
GS-4210-48T4S
Hardware Specications
Hardware Version 3
Copper Ports 48 x 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
SFP Ports 4 100/1000BASE-X SFP interfaces
Console 1 RS232-to-RJ45 serial port (115200, 8, N, 1)
Reset Button
< 5 sec: System reboot
> 5 sec: Factory default
Thermal Fan Fanless design
Power Requirements AC 100~240V, 50/60Hz, auto-sensing.
Power Consumption / Dissipation 36.1 watts/123BTU
Dimensions (W x D x H) 440 x 330 x 44 mm, 1U height
Weight 4.2 kg
Enclosure Metal
ESD Protection 6KV DC
LED
System:
PWR(Power) (Green). SYS (Green)
10/100/1000T RJ45 Interfaces (Port 1 to Port 48):
1000Mbps, LNK/ACT (Green)
10/100Mbps, LNK/ACT (Orange)
100/1000Mbps SFP Interfaces (Port 49 to Port 52):
1000Mbps, LNK/ACT (Green)
100Mbps, LNK/ACT (Orange)
Switching
Switch Architecture Store-and-Forward
Switch Fabric 104Gbps/non-blocking
Switch Throughput@64bytes 77.38Mpps @64bytes
Address Table 16K entries
Shared Data Buffer 12Mbit SRAM packet buffer
Flow Control
IEEE 802.3x pause frame for full duplex
Back pressure for half duplex
Jumbo Frame 10K bytes
Layer 2 Functions
Port Mirroring
TX/RX/Both
Many-to-1 monitor
VLAN
802.1Q tagged VLAN
Up to 256 VLAN groups, out of 4094 VLAN IDs
802.1ad Q-in-Q tunneling (VLAN stacking)
Voice VLAN
Protocol VLAN
Private VLAN (Protected port)
GVRP
Management VLAN
Link Aggregation
IEEE 802.3ad LACP and static trunk
Supports 8 trunk groups with each having 8 ports
Spanning Tree Protocol
STP, IEEE 802.1D Spanning Tree Protocol
RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
MSTP, IEEE 802.1s Multiple Spanning Tree Protocol
STP BPDU Guard, BPDU Filtering and BPDU Forwarding
IGMP Snooping
IGMP (v2/v3) snooping
IGMP querier
Up to 256 multicast groups
MLD Snooping IPv6 MLD (v1 / v2) snooping, up to 256 multicast groups
QoS
8 mapping IDs to 8 level priority queues
- Port number
- 802.1p priority
- DSCP / IP precedence of IPv4 / IPv6 packets
Trafc classication based, strict priority and WRR
Ingress / Egress Rate Limit per port bandwidth control
Ring Supports ERPS, and complies with ITU-T G.8032