Datasheet
GS-4210-24UP4C
7
Specications
Product
GS-4210-24UP4C
HardwareSpecications
Copper Ports 28 x 10/100/1000BASE-T RJ45 auto-MDI/MDI-X port
SFP Slots
4 x 100/1000BASE-X SFP interface shared with port-25 to port-28
Supports 100/1000Mbps dual mode and DDM
PoE Injector Port 24 ports with 802.3at/af/802.3bt PoE++ injector function with port-1 to port-24
Switch Architecture Store-and-Forward
Switch Fabric 56Gbps/non-blocking
Switch Throughput@64Bytes 41.67Mpps
Address Table 8K entries
Shared Data Buffer 4.1 megabits
Flow Control
IEEE 802.3x pause frame for full duplex
Back pressure for half duplex
Jumbo Frame 10K bytes
Reset Button
< 5 sec: System reboot
> 5 sec: Factory default
LED
System:
PWR x1 (Green)
SYS x1 (Green)
PerPoEPort(Port1toPort24):
10/100/1000 LNK/ACT x1 (10/100: Orange.1000: Green)
IEEE 802.3af/at/bt PoE-in-use x1 (802.3af/at: Orange. 802.3bt: Green)
PerGigabitTPPort(Port25toPort28):
10/100 LNK/ACT x1 (Orange)
1000 LNK/ACT x1 (Green)
PerGigabitSFPPort(Port25toPort28):
100 LNK/ACT x1 (Orange)
1000 LNK/ACT x1 (Green)
Alert:
PoE PWR x1 (Red)
FAN1 x1 (Red)
FAN2 x1 (Red)
FAN3 x1 (Red)
Power Requirements 100~240V AC, 50/60Hz, auto-sensing
Dimensions (W x D x H) 440 x 300 x 44.5 mm, 1U height
ESD Protection
Contact Discharge 4KV DC
Air Discharge 8KV DC
Enclosure Metal
Weight 5kg
Power Consumption/Dissipation 900 watts (max.)/3070 BTU
Fan 3 x smart fan
Power over Ethernet
PoE Standard
IEEE 802.3bt PoE++ PSE
Backward compatible with IEEE 802.3at/af PoE PSE
PoE Power Supply Type
■802.3bt
■UPoE/POH
■End-span
■Mid-span
■Force
PoE Power Output
Per port 54V DC
■802.3btmode,Ports1to8:maximum90watts
■802.3btmode,Ports9to24:maximum60watts
■UPoEmode,Ports1to8:maximum95watts
■UPoE-mode,Ports9to24:maximum72watts
■End-spanmode:maximum36watts
■Mid-spanmode:maximum36watts
Power Pin Assignment
■802.3bt:1/2(-),3/6(+),4/5(+),7/8(-)
■UPoE:1/2(-),3/6(+),4/5(+),7/8(-)
■End-span:1/2(-),3/6(+)
■Mid-span:4/5(+),7/8(-)