User's Manual

User’s Manual of GS-4210-16T2S_24T2S_24P2S
4.2.3 IPv6 Configuration
The IPv6 Configuration includes Auto Configuration, IPv6 Address and Gateway. The configured column is used to view or
change the IPv6 configuration. Fill out the Auto Configuration, IPv6 Address and Gateway for the device. The screens in Figure
4-2-4 and Figure 4-2-5 appear.
Figure 4-2-4: IPv6 Address Setting Page Screenshot
The page includes the following fields:
Object Description
 Auto Configuration
ding to
er.
Enable IPv6 auto-configuration by checking this box.
If it fails, the configured IPv6 address is zero. The router may delay respon
a router solicitation for a few seconds; the total time needed to complete
auto-configuration can be significantly long
 IPv6 Address
ur
on separating each field (:). For example,
.34'.
e is 1 through 128.
Provide the IPv6 address of this switch.
IPv6 address is in 128-bit records represented as eight fields of up to fo
hexadecimal digits with a col
'fe80::215:c5ff:fe03:4dc7'.
The symbol '::' is a special syntax that can be used as a shorthand way of
representing multiple 16-bit groups of contiguous zeros; but it can only appear
once. It also uses the following legally IPv4 address. For example, ':192.1.2
Provide the IPv6 Prefix of this switch. The allowed rang
 Gateway
ur
on separating each field (:). For example,
Provide the IPv6 gateway address of this switch.
IPv6 address is in 128-bit records represented as eight fields of up to fo
hexadecimal digits with a col
'fe80::215:c5ff:fe03:4dc7'.
 DHCPv6 Client
delegation of long-lived prefixes that they can push to individual local hosts.
To enable this Managed Switch to accept a configuration from a Dynamic Host
Configuration Protocol version 6 (DHCPv6) server. By default, the Managed
Switch does not perform DHCPv6 client actions. DHCPv6 clients request the
53