Quick Guide

6
4. Logon to the Console
Once the terminal is connected to the device, power on the Managed Switch and
the terminal will run self testing procedures. Then, the following message asks
tologinusernameandpassword. Thefactorydefaultusernameand password are
shownasfollowsandtheloginscreeninFigure4-1appears.
Username:admin
Password:admin
Note
The following console screen based on GS-4210-24T2S will be the
sameasthatofGS-4210-16T2S.
Figure 4-1: Managed Switch Console Login Screen
The usercan now enter commandsto manage the ManagedSwitch. Fora detailed
descriptionofthecommands,pleaserefertothefollowingchapters.
Note
1.Forsecurityreason, pleasechange andmemorize the newpass-
wordafterthisfirstsetup.
2.Only accept command in lowercase letter under console inter-
face.