Quick Guide

5
3. Terminal Setup
To congure the system, connect a serial cable to a COM port on a PC or
notebookcomputerandtoRJ45typeofconsoleportoftheManagedSwitch.
RJ45 to RS232 Cable
Serial Port
11520,8,n,1
Managed Switch
Console
11520,N,8,1
PC / Workstation with
Terminal Emulation Software
Serial Port
Figure 3-1: Managed Switch Console Connectivity
A terminal program is required to make the software connection to the Managed
Switch.
1. Run terminal program on the OS.
2.When the following screen appears, make sure that the COM port should be
conguredas:
Baud :115200
Databits :8
Parity :None
Stopbits :1
Flowcontrol :None
Figure 3-2: COM Port Conguration