(V2) Datasheet

3
GS-4210-24P4C/GS-4210-24PL4C
• DHCPSnoopingtolterdistrustedDHCPmessages
• Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
• IPSourceGuardpreventsIPspoongattacks
• DoS Attack Prevention
• SSH/SSL
Management
• IPv4 and IPv6 dual stack management
• Switch Management Interface
– Web switch management
– Console/Telnet Command Line Interface
– SNMP v1 and v2c switch management
– SSHv2, TLSv1.2 and SNMP v3 secure access
• SNMP Management
– Four RMON groups (history, statistics, alarms, and
events)
– SNMP trap for interface Link Up and Link Down
notication
• User Privilege Levels Control
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System Maintenance
– Firmware upload/download via HTTP/TFTP
– Congurationupload/downloadthrough Webinterface
– Dual Images
– Hardware reset button for system reboot or reset to
factory default
• SNTP Network Time Protocol
• Network Diagnostic
– ICMPv6/ICMPv4 Remote Ping
– Cable Diagnostics
– SFP-DDM (Digital Diagnostic Monitor)
• Link Layer Discovery Protocol (LLDP) Protocol and LLDP-
MED
• Event message logging to remote Syslog server
• Smart fan with speed control
• PLANET NMS System and Smart Discovery Utility for
deployment management
to enable or disable PoE power feeding for each PoE port during specified time
intervals and it is a powerful function to help SMBs or enterprises save power and
money. It also increases security by powering off PDs that should not be in use
during non-business hours.
Power
On
Power
On
Power
On
Power
On
6 Watts 6 Watts 12 Watts 12 Watts
PoE
PoE PoE
PoE
Power
Off
Power
Off
Power
Off
Power
On
6 Watts 6 Watts 12 Watts 12 Watts
PoE
PoE PoE
PoE
PoE
1000Base-T UTP with PoE
Total consumption of 36 watts/hr
5PM8AM
5PM 8AM
Save 24 watts/hr during off-business hours
Total Saved = 10800 Watts/month
PoE Usage Monitoring
Via the power usage chart in the web management interface, the GS-4210-
24P(L)4C enables the administrator to monitor the status of the power usage of the
connectedPDsinrealtime.Thus,itgreatlyenhancesthemanagementefciencyof
the facilities.
802.3at PoE+ Power and Ethernet Data Transmission Distance Extension
In the “Extend” operation mode, the GS-4210-24P(L)4C operates on a per-port
basis at 10Mbps duplex operation but can support 36-watt PoE power output over
a distance of up to 250 meters overcoming the 100m limit on Ethernet UTP cable.
With this brand-new feature, the GS-4210-24P(L)4C provides an additional solution
for 802.3at/af PoE distance extension, thus saving the cost of Ethernet cable
installation.
Extend Mode
Power
250 meters (820 feet)
PoE
GS-4210-24P(L)4C
PoE
10BASE-T UTP with PoE
PoE IP Camera
Environmentally-friendly, Smart Fan Design for Silent Operation
The GS-4210-24P(L)4C features a low noise design and an effective ventilation
system. It supports the smart fan technology that automatically controls the speed of
the built-in fan to reduce noise and maintain the temperature of the PoE switch for
optimal power output capability. The GS-4210-24P(L)4C is able to operate reliably,
stably and quietly in any environment without affecting its performance.
IPv6/IPv4 Dual Stack Management
Supporting both IPv6 and IPv4 protocols, the GS-4210-24P(L)4C helps the SMBs to
step in the IPv6 era with the lowest investment as its network facilities need not be
replaced or overhauled if the IPv6 FTTx edge network is set up.